To complete this course, you must pass all units in the Core Structure and one Major. The More Details tab has a link to the Course Planners Site which list all units for this course. Note that full-time students generally enrol in 24cp per term and part-time students generally enrol in a half-load of 12cp per term.

Course planners for the Civil, Electrical and Mechanical Majors include the MATH11247 Foundation Mathematics unit. You may opt-out of this unit and complete an additional elective instead if you completed the Mathematics Self-diagnostics Test and achieved satisfactory results. See the More Details tab for how to access the Mathematics Self-Diagnostic Test and for more information on alternate pathways for completing the first-year mathematics units.

Available units
Students must complete the following compulsory units:
ENEG11005	Introduction to Contemporary Engineering
ENEG11007	Engineering Industry Project Investigation
ENEG11008	Materials for Engineers
MATH11218	Applied Mathematics
MATH11219	Applied Calculus

Professional Engineering Practice

To be eligible for graduation, you must complete 480 hours of Professional Engineering Practice, including a minimum of 240 hours of industry experience. Mandatory work experience is set by the course accreditation body Engineers Australia. In one of your final terms of study, you must enrol into the following zero-credit unit, at no cost to you, and record your Professional Engineering Practice in an ePortfolio. The More Details tab contains a link to the Undergraduate Engineering Course Moodle Meta-site which contains further instructions on completing your Professional Engineering Practice.

Available units
Students must complete the following compulsory units:
ENEP14004	Engineering Practice Experience

Intermediate Units

Available units
Students must complete the following compulsory units:
MATH11247	Foundation Mathematics
ENEG11006	Engineering Statics
ENEG11009	Fundamentals of Sustainable Energy
ENEG12007	Creative Engineering
ENEC12008	Geotechnical Engineering
ENEC12009	Engineering Surveying and Spatial Sciences
ENEC12010	Hydraulics and Hydrology
ENEC12011	Transport Systems
ENEC12012	Stress Analysis
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling

Advanced Units

ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEC13014	Water Supply and Wastewater Technology
ENEC13015	Steel and Timber Design
ENEC13016	Concrete Technology and Design
ENEC13017	Advanced Structural Analysis
ENEC14014	Structural and Geotechnical Design
ENEC14016	Traffic and Transportation Engineering
ENEC14017	Water Resources Engineering

Elective Units

There are two elective units, but one must be chosen from the professional practice units. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to practise as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Intermediate units

Available units
Students must complete the following compulsory units:
MATH11247	Foundation Mathematics
ENEG11006	Engineering Statics
MGMT11167	Foundations of Social Innovation
ENEG12007	Creative Engineering
ENEC12009	Engineering Surveying and Spatial Sciences
ENEC12010	Hydraulics and Hydrology
ENEC12008	Geotechnical Engineering
ENEC12011	Transport Systems
ENEC12012	Stress Analysis
ENEG12008	Appropriate Technology for Humanitarian Projects
MATH12222	Advanced Mathematical Applications

Advanced units

ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEG13001	Humanitarian Engineering Project
ENEC13014	Water Supply and Wastewater Technology
ENEC13015	Steel and Timber Design
ENEC13016	Concrete Technology and Design
ENEC14014	Structural and Geotechnical Design
ENEC14016	Traffic and Transportation Engineering
ENEC14017	Water Resources Engineering
ENEC14018	Disaster Resilient Infrastructure

Elective Units

There is one elective unit, but it must be chosen from the professional practice units. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Available units
Students must complete 1 from the following units:
ENEP11007	Engineering Employment Preparation
ENEP12007	Engineering Business Fundamentals
ENEP12008	Engineering Leadership

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Intermediate Units

Available units
Students must complete the following compulsory units:
MATH11247	Foundation Mathematics
ENEG11009	Fundamentals of Sustainable Energy
ENEG11006	Engineering Statics
ENEG12007	Creative Engineering
ENEE12014	Electrical Circuit Analysis
ENEE12015	Electrical Power Engineering
ENEE12016	Signals and Systems
ENEX12002	Introductory Electronics
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling

Advanced Units

ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEX13002	Power Electronics
ENEE13016	Power System Protection
ENEE13019	Control Systems Analysis and Design
ENEE13021	Power System Analysis and Design
ENEE13022	Communication Technology
ENEE14005	Capstone Power and Control Design
ENEE14006	Embedded Microcontrollers
ENEE14007	Electrical Machines and Drives Applications

Elective Units

There are two elective units, but one must be chosen from the professional practice units. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Intermediate Units

Available units
Students must complete the following compulsory units:
ENEG11009	Fundamentals of Sustainable Energy
COIT11226	Systems Analysis
COIT11222	Programming Fundamentals
COIT11237	Database Design & Implementation
COIT11240	Dashboard Design and Visualisation
ENEE12014	Electrical Circuit Analysis
ENEE12015	Electrical Power Engineering
ENEE12016	Signals and Systems
ENEX12002	Introductory Electronics
COIT12209	Data Science
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling

Advanced Units

ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEE13016	Power System Protection
ENEE13019	Control Systems Analysis and Design
ENEE13021	Power System Analysis and Design
ENEE13022	Communication Technology
ENEE14005	Capstone Power and Control Design
ENEE14006	Embedded Microcontrollers
ENEE14007	Electrical Machines and Drives Applications

Elective Units

There is one elective unit, but it must be chosen from the professional practice units.

Available units
Students must complete from the following units:
ENEP11007	Engineering Employment Preparation
ENEP12007	Engineering Business Fundamentals
ENEP12008	Engineering Leadership

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Intermediate Units

Available units
Students must complete the following compulsory units:
ENEG11009	Fundamentals of Sustainable Energy
COIT11222	Programming Fundamentals
COIT11226	Systems Analysis
COIT11237	Database Design & Implementation
ENEE12014	Electrical Circuit Analysis
ENEE12015	Electrical Power Engineering
ENEE12016	Signals and Systems
ENEX12002	Introductory Electronics
COIS12036	Human-Computer Interaction
COIT12207	Internet Applications
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling

Advanced Units

ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEE13016	Power System Protection
ENEE13019	Control Systems Analysis and Design
ENEE13021	Power System Analysis and Design
ENEE13022	Communication Technology
ENEE14005	Capstone Power and Control Design
ENEE14006	Embedded Microcontrollers
ENEE14007	Electrical Machines and Drives Applications

Elective Units

There is one elective unit, but it must be chosen from the professional practice units.

Available units
Students must complete from the following units:
ENEP11007	Engineering Employment Preparation
ENEP12007	Engineering Business Fundamentals
ENEP12008	Engineering Leadership

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Intermediate Units

Available units
Students must complete the following compulsory units:
MATH11247	Foundation Mathematics
ENEG11006	Engineering Statics
ENEG11009	Fundamentals of Sustainable Energy
ENEG12007	Creative Engineering
ENEM12006	Fluid Mechanics
ENEM12008	Solid Materials Handling
ENEM12009	Structural Mechanics
ENEM12010	Engineering Dynamics
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling

Advanced Units

ENEM14014 and ENEM14015 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEM13012	Maintenance Engineering
ENEM13014	Thermodynamics
ENEM13015	Design of Machine Elements
ENEM13018	Materials and Manufacturing
ENEX13003	Mechanical Design Practice
ENEM13019	Fluid Machinery
ENEM14011	Energy Conversion
ENEM14014	Capstone Thermofluid Engineering
ENEM14015	Dynamic System Modelling and Control

Elective Units

There are two elective units, but one must be chosen from the professional practice units. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Intermediate Units

Available units
Students must complete the following compulsory units:
ENEG11006	Engineering Statics
ENEG11009	Fundamentals of Sustainable Energy
ENEG12007	Creative Engineering
ENEM12009	Structural Mechanics
ENEM12010	Engineering Dynamics
ENEE12014	Electrical Circuit Analysis
ENEE12016	Signals and Systems
ENEX12001	Electrical Power and Machines
ENEX12002	Introductory Electronics
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling

Advanced Units

ENEX14001 Mechatronics Systems Design and ENEE14006 Embedded Microcontrollers are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEX13001	Industrial Control and Automation
ENEX13002	Power Electronics
ENEX13003	Mechanical Design Practice
ENEX13004	Robotics and Autonomous Systems
ENEX13005	Machine Design and Vibrations
ENEX13006	Thermofluids Theory and Applications
ENEE13019	Control Systems Analysis and Design
ENEE14006	Embedded Microcontrollers
ENEX14001	Mechatronics Systems Design

Elective Units

There is one elective unit, but it must be chosen from the professional practice units.

Available units
Students must complete 1 from the following units:
ENEP11007	Engineering Employment Preparation
ENEP12007	Engineering Business Fundamentals
ENEP12008	Engineering Leadership

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Intermediate Units

Available units
Students must complete the following compulsory units:
ENEG11006	Engineering Statics
ENEG11009	Fundamentals of Sustainable Energy
COIT11222	Programming Fundamentals
COIT11226	Systems Analysis
COIT11237	Database Design & Implementation
ENAR12014	Introduction to Mining Technology
ENAR12016	Earth Science
ENEC12009	Engineering Surveying and Spatial Sciences
ENEE12014	Electrical Circuit Analysis
ENEE12016	Signals and Systems
ENEX12002	Introductory Electronics

Advanced Units

ENER14001 Resource Systems Automation Project and ENER14002 Resource Systems Feasibility Project are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENAR12004	Mine Management and Safety
ENAR12006	Rock Engineering
ENAR12013	Mine Planning and Design
COIT12209	Data Science
ENEX13001	Industrial Control and Automation
ENAR13001	Economic Geology
ENER14001	Resource Systems Automation Project
ENER14002	Resource Systems Feasibility Project

Elective Units

There are two elective units, but one must be chosen from the professional practice units. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Advisor just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation