CC32 Bachelor of Engineering (Honours) and Diploma of Professional Practice (Co-op Engineering)

In order to complete this course, you must:

  1. Complete the core structure
  2. Complete 1 major

Core Structure

Number of units: 11 Total credit points: 84

To complete this course, you must pass all units in the Core Structure and one Major. The More Details tab has a link to the Course Planners Site which list all units for this course. Note that full-time students generally enrol in 24cp per term and part-time students generally enrol in a half-load of 12cp per term.

Course planners for the Civil, Electrical and Mechanical Majors include the MATH11247 Foundation Mathematics unit. You may opt-out of this unit and complete an additional elective instead if you completed the Mathematics Self-Diagnostics Test and achieved satisfactory results. See the More Details tab for how to access the Mathematics Self-Diagnostic Test and for more information on alternate pathways for completing the first-year mathematics units.

Available units
Students must complete the following compulsory units:
ENEG11005 Fundamentals of Professional Engineering
ENEG11007 Engineering Industry Project Investigation
ENEG11008 Materials for Engineers
MATH11218 Applied Mathematics
MATH11219 Applied Calculus

Professional Engineering Practice

You must complete the following Diploma of Professional Practice (Co-op Engineering) units during your course. This Diploma consists of three compulsory units, two compulsory 24-week work placements and one Leadership Elective.

If you are intending to go on placement at the end of your second year of study, you should enrol in ENEP11007 Engineering Employment Preparation in Year 2 Term 2. As ENEP11007 is a prerequisite to ENEP11006 Industry Practice 1, you will not be able to go on placement if you have not completed ENEP11007. The More Details tab includes a link to the Course Planners Site for this course.

If you are taking the Civil with Humanitarian Major, you are required to take ENEP12008 Engineering Leadership unit as your Leadership Elective.

Available units
Students must complete the following compulsory units:
ENEP11007 Engineering Employment Preparation
ENEP11006 Industry Practice 1
ENEP11010 Industry Practice Review
ENEP12007 Engineering Business Fundamentals
ENEP12010 Industry Practice 2
Available units
Students must complete 1 from the following units:
ENEP12008 Engineering Leadership
ENEG13001 Humanitarian Engineering Project

Civil Major

Number of units: 21 Total credit points: 150

Intermediate units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisers for enrolment assistance for these two terms. 

Available units
Students must complete the following compulsory units:
MATH11247 Foundation Mathematics
ENEG11006 Engineering Statics
ENEG11009 Fundamentals of Sustainable Energy
ENEG12007 Creative Engineering
ENEC12008 Geotechnical Engineering
ENEC12009 Engineering Surveying
ENEC12010 Hydraulics and Hydrology
ENEC12011 Transport Systems
ENEG13002 Engineering Futures
ENEC12012 Stress Analysis
MATH12225 Applied Computational Modelling

Advanced Units

ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience. You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisers to modify your work planners to suit the work placements.

Available units
Students must complete the following compulsory units:
ENEC13014 Water Supply and Wastewater Technology
ENEC13015 Steel and Timber Design
ENEC13017 Advanced Structural Analysis
ENEC13016 Concrete Technology and Design
ENEC14014 Structural and Geotechnical Design
ENEC14016 Traffic and Transportation Engineering
ENEC14017 Water Resources Engineering

Elective Units

There is one elective unit. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Adviser just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003 Engineering Honours Project Planning
ENEG14005 Engineering Honours Project Implementation

Civil with Humanitarian Major

Number of units: 21 Total credit points: 150

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisers for enrolment assistance for these two terms.

Available units
Students must complete the following compulsory units:
MATH11247 Foundation Mathematics
SOCL11059 Introducing Social Change
ENEG11006 Engineering Statics
ENEG12007 Creative Engineering
ENEC12008 Geotechnical Engineering
ENEC12009 Engineering Surveying
ENEC12010 Hydraulics and Hydrology
ENEC12011 Transport Systems
ENEC12012 Stress Analysis
ENEG13002 Engineering Futures
ENEG12008 Appropriate Technology for Humanitarian Projects

Advanced Units

ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience. You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisers to modify your work planners to suit the work placements.

Available units
Students must complete the following compulsory units:
ENEC13014 Water Supply and Wastewater Technology
ENEC13015 Steel and Timber Design
ENEC13016 Concrete Technology and Design
ENEG13001 Humanitarian Engineering Project
ENEC14014 Structural and Geotechnical Design
ENEC14016 Traffic and Transportation Engineering
ENEC14017 Water Resources Engineering
ENEC14018 Disaster Resilient Infrastructure

Elective Units

If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Adviser just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003 Engineering Honours Project Planning
ENEG14005 Engineering Honours Project Implementation

Electrical Major

Number of units: 21 Total credit points: 150

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisers for enrolment assistance for these two terms.

Available units
Students must complete the following compulsory units:
MATH11247 Foundation Mathematics
ENEG11006 Engineering Statics
ENEG11009 Fundamentals of Sustainable Energy
ENEG12007 Creative Engineering
ENEE12014 Electrical Circuit Analysis
ENEE12015 Electrical Power Engineering
ENEE12016 Signals and Systems
ENEX12002 Introductory Electronics
ENEG13002 Engineering Futures
MATH12225 Applied Computational Modelling

Advanced Units

ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisers to modify your work planners to suit the work placements.

Available units
Students must complete the following compulsory units:
ENEX13002 Power Electronics
ENEE13016 Power System Protection
ENEE13019 Control Systems Analysis and Design
ENEE13021 Power System Analysis and Design
ENEE13022 Communication Networks
ENEE14005 Capstone Power and Control Design
ENEE14006 Embedded Microcontrollers
ENEE14007 Electrical Machines and Drives Applications

Elective Units

There is one elective unit. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Adviser just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003 Engineering Honours Project Planning
ENEG14005 Engineering Honours Project Implementation

Electrical with Data Analytics Major

Number of units: 21 Total credit points: 150

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisers for enrolment assistance for these two terms.

Available units
Students must complete the following compulsory units:
ENEG11009 Fundamentals of Sustainable Energy
COIT11222 Programming Fundamentals
COIT11226 Systems Analysis
COIT11237 Database Design & Implementation
COIT11240 Dashboard Design and Visualisation
ENEE12014 Electrical Circuit Analysis
ENEE12015 Electrical Power Engineering
ENEE12016 Signals and Systems
ENEX12002 Introductory Electronics
COIT12209 Data Science
ENEG13002 Engineering Futures
MATH12225 Applied Computational Modelling

Advanced Units

ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience. You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisers to modify your work planners to suit the work placements.

Available units
Students must complete the following compulsory units:
ENEE13016 Power System Protection
ENEE13019 Control Systems Analysis and Design
ENEE13021 Power System Analysis and Design
ENEE13022 Communication Networks
ENEE14005 Capstone Power and Control Design
ENEE14006 Embedded Microcontrollers
ENEE14007 Electrical Machines and Drives Applications

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Adviser just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003 Engineering Honours Project Planning
ENEG14005 Engineering Honours Project Implementation

Electrical with Information Processing Major

Number of units: 21 Total credit points: 150

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisers for enrolment assistance for these two terms.

Available units
Students must complete the following compulsory units:
ENEG11009 Fundamentals of Sustainable Energy
COIT11222 Programming Fundamentals
COIT11226 Systems Analysis
COIT11237 Database Design & Implementation
COIT12207 Internet Applications
COIS12036 Human-Computer Interaction
ENEE12014 Electrical Circuit Analysis
ENEE12015 Electrical Power Engineering
ENEE12016 Signals and Systems
ENEX12002 Introductory Electronics
ENEG13002 Engineering Futures
MATH12225 Applied Computational Modelling

Advanced Units

ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience. You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisers to modify your work planners to suit the work placements.

Available units
Students must complete the following compulsory units:
ENEE13016 Power System Protection
ENEE13019 Control Systems Analysis and Design
ENEE13021 Power System Analysis and Design
ENEE13022 Communication Networks
ENEE14005 Capstone Power and Control Design
ENEE14006 Embedded Microcontrollers
ENEE14007 Electrical Machines and Drives Applications

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Adviser just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003 Engineering Honours Project Planning
ENEG14005 Engineering Honours Project Implementation

Mechanical Major

Number of units: 22 Total credit points: 150

Intermediate Units

Note that you are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisers for enrolment assistance for these two terms.

Available units
Students must complete the following compulsory units:
MATH11247 Foundation Mathematics
ENEG11006 Engineering Statics
ENEG11009 Fundamentals of Sustainable Energy
ENEG12007 Creative Engineering
ENEM12006 Fluid Mechanics
ENEM12008 Solid Materials Handling
ENEM12009 Structural Mechanics
ENEM12010 Engineering Dynamics
ENEG13002 Engineering Futures
MATH12225 Applied Computational Modelling

Advanced Units

ENEM14014 and ENEM14015 are double credit-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisers to modify your work planners to suit the work placements.

Available units
Students must complete the following compulsory units:
ENEM13012 Maintenance Engineering
ENEM13014 Thermodynamics
ENEM13015 Design of Machine Elements
ENEM13018 Materials and Manufacturing
ENEX13003 Design of Mechatronics Elements
ENEM13019 Fluid Machinery
ENEM14011 Energy Conversion
ENEM14014 Capstone Thermofluid Engineering
ENEM14015 Dynamic System Modelling and Control

Elective Units

There is one elective unit. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Adviser just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003 Engineering Honours Project Planning
ENEG14005 Engineering Honours Project Implementation

Mechatronics Major

Number of units: 22 Total credit points: 150

Intermediate Units

You are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisers for enrolment assistance for these two terms.

Available units
Students must complete the following compulsory units:
ENEG11009 Fundamentals of Sustainable Energy
ENEG11006 Engineering Statics
ENEG12007 Creative Engineering
ENEM12009 Structural Mechanics
ENEM12010 Engineering Dynamics
ENEE12014 Electrical Circuit Analysis
ENEE12016 Signals and Systems
ENEX12001 Electrical Power and Machines
ENEX12002 Introductory Electronics
ENEG13002 Engineering Futures
MATH12225 Applied Computational Modelling

Advanced Units

ENEX14001 Mechatronics Systems Design and ENEE14006 Embedded Microcontrollers are double credit-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisers to modify your work planners to suit the work placements.

Available units
Students must complete the following compulsory units:
ENEX13001 Instrumentation and Industrial Automation
ENEX13002 Power Electronics
ENEX13003 Design of Mechatronics Elements
ENEX13004 Advanced Dynamics and Robotics
ENEX13005 Machine Design and Vibrations
ENEX13006 Thermofluids Theory and Applications
ENEE13019 Control Systems Analysis and Design
ENEX14001 Mechatronics Systems Design
ENEE14006 Embedded Microcontrollers

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Adviser just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003 Engineering Honours Project Planning
ENEG14005 Engineering Honours Project Implementation

Resource Systems Major

Number of units: 22 Total credit points: 150

Intermediate Units

Note that you are required to complete 30cp in Year 2 Term 2 and Year 3 Term 2 for this course. Please contact the Course Advisers for enrolment assistance for these two terms.

Available units
Students must complete the following compulsory units:
ENEG11009 Fundamentals of Sustainable Energy
ENEG11006 Engineering Statics
COIT11222 Programming Fundamentals
COIT11226 Systems Analysis
COIT11237 Database Design & Implementation
ENAR12014 Introduction to Mining Technology
ENAR12016 Earth Science
ENEC12009 Engineering Surveying
ENEE12014 Electrical Circuit Analysis
ENEE12016 Signals and Systems
ENEX12002 Introductory Electronics

Advanced Units

Please note that the Resource Systems Automation Project and Resource Systems Feasibility Project are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENAR12004 Mine Management and Safety
ENAR12006 Rock Engineering
ENAR12013 Mine Planning and Design
COIT12209 Data Science
ENEX13001 Instrumentation and Industrial Automation
ENAR13001 Economic Geology
ENER14001 Resource Systems Automation Project
ENER14002 Resource Systems Feasibility Project

Elective Units

There is one elective unit. If you opt-out of the MATH11247 Foundation Mathematics unit you must complete one additional elective from the 6cp units available. The More Details tab contains a link to the Course Planner Site where all pre-approved electives are listed. Contact the Head of Course if you want to discuss studying a unit not on the pre-approved list.

Undergraduate Thesis

At the end of your course, you will complete an undergraduate thesis over two terms. Your thesis confirms your ability to work as a Professional Engineer. It is strongly recommended to decide your topic based on your career interests. You should organise an Academic Adviser just prior to commencing the thesis planning unit.

Available units
Students must complete the following compulsory units:
ENEG14003 Engineering Honours Project Planning
ENEG14005 Engineering Honours Project Implementation