Note that while the Bachelor of Engineering (Honours) and the Master of Project Management in Engineering is accredited by Engineers Australia at the professional level, the Master of Project Management in Engineering by itself is not an accredited entry to engineering professional practice.

In order to complete this course, you must:

1. Complete the Core Structure
2. Complete 1 Major

The More Details tab has a link to the Course Planners for this course.

Note that full-time students generally enrol in 24cp per term and part-time students (working more than 20 hours a week) generally enrol in a half-load i.e. 12cp per term.

If you are enrolled in civil, electrical or mechanical majors your Course Planner includes the MATH11247 Foundation Mathematics unit. You can opt-out of the MATH11247 Foundation Mathematics unit and complete an elective instead after successfully completing a mathematic self-diagnostics test. See More Details tab for how to access the diagnostic test and alternative pathways for completing the first year mathematics units.

Available units
Students must complete the following compulsory units:
ENEG11005	Introduction to Contemporary Engineering
ENEG11006	Engineering Statics
ENEG11007	Engineering Industry Project Investigation
ENEG11008	Materials for Engineers
MATH11218	Applied Mathematics
MATH11219	Applied Calculus

Intermediate Units

Available units
Students must complete the following compulsory units:
MATH11247	Foundation Mathematics
ENEG11009	Fundamentals of Sustainable Energy
ENEG12007	Creative Engineering
ENEC12009	Engineering Surveying and Spatial Sciences
ENEC12010	Hydraulics and Hydrology
MATH12225	Applied Computational Modelling
ENEC12008	Geotechnical Engineering
ENEC12011	Transport Systems
ENEC12012	Stress Analysis
ENEG13002	Engineering Futures

Advanced Units

Please note that ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEC13015	Steel and Timber Design
ENEC13017	Advanced Structural Analysis
ENEC13016	Concrete Technology and Design
ENEC13014	Water Supply and Wastewater Technology
ENEC14014	Structural and Geotechnical Design
ENEC14016	Traffic and Transportation Engineering
ENEC14017	Water Resources Engineering

Electives

In addition to the units listed above, there is an elective slot in the civil major. 

If you opt-out of the MATH11247 Foundation Mathematics unit you are required to complete an additional 6cp elective.

There is a pre-approved set of electives listed in the Course Planner (the link is in the More Details tab). Should you wish to complete an elective not on the pre-approved list, contact the Head of Course to discuss.

Capstone Project

At the end of the bachelor of engineering component of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Engineering Project Management

In addition to the engineering project units ENEG14003 and ENEG14005, you will complete the following project management units which together make up the Master of Engineering Project Management qualification.

Available units
Students must complete the following compulsory units:
PPMP20007	Project Management Concepts
PPMP20008	Initiating and Planning Projects
PPMP20009	Leading Lean Projects
PPMP20010	Executing and Closing Projects
PPMP20011	Contract and Procurement Management
PPMP20012	Portfolio and Program Management
PPMP20015	Research Proposal
PPMP20016	Research Project 2

Engineering Professional Practice

This course has 480 hours (including a minimum of 240 hours of industry experience) of Engineering Professional Practice requirement prior to graduation. 'Undergraduate Engineering Course' Moodle meta-site will provide you with information about the work experience requirements of the accreditation body, the evidence you need to collect and information on how to create the ePortfolio that you will use to accumulate evidence of your professional practice exposure throughout the course of study. In one of the later terms of study, after you have completed your professional practice requirements, you must enrol into the following unit to provide evidence of how you have attained the professional engineering practice exposure required by Engineers Australia. Note that this unit is zero-credits and hence is no cost to you.

Available units
Students must complete the following compulsory units:
ENEP14004	Engineering Practice Experience

Intermediate Units

Available units
Students must complete the following compulsory units:
ENEC12008	Geotechnical Engineering
SOCL11059	Introducing Social Change
ENEC12009	Engineering Surveying and Spatial Sciences
ENEC12010	Hydraulics and Hydrology
ENEC12011	Transport Systems
ENEC12012	Stress Analysis
ENEG12007	Creative Engineering
ENEG12008	Appropriate Technology for Humanitarian Projects
MATH11247	Foundation Mathematics
ENEG13002	Engineering Futures

Advanced Units

Please note that ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEC13014	Water Supply and Wastewater Technology
ENEC13015	Steel and Timber Design
ENEC13016	Concrete Technology and Design
ENEC14014	Structural and Geotechnical Design
ENEC14016	Traffic and Transportation Engineering
ENEC14017	Water Resources Engineering
ENEC14018	Disaster Resilient Infrastructure
ENEG13001	Humanitarian Engineering Project

Capstone Project

At the end of the bachelor of engineering component of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Engineering Project Management

In addition to the engineering project units ENEG14003 and ENEG14005, you will complete the following project management units which together make up the Master of Engineering Project Management qualification.

Available units
Students must complete the following compulsory units:
PPMP20007	Project Management Concepts
PPMP20008	Initiating and Planning Projects
PPMP20009	Leading Lean Projects
PPMP20010	Executing and Closing Projects
PPMP20011	Contract and Procurement Management
PPMP20012	Portfolio and Program Management
PPMP20015	Research Proposal
PPMP20016	Research Project 2

Engineering Professional Practice

This course has 480 hours (including a minimum of 240 hours of industry experience) of Engineering Professional Practice requirement prior to graduation. 'Undergraduate Engineering Course' Moodle meta-site will provide you with information about the work experience requirements of the accreditation body, the evidence you need to collect and information on how to create the ePortfolio that you will use to accumulate evidence of your professional practice exposure throughout the course of study. In one of the later terms of study, after you have completed your professional practice requirements, you must enrol into the following unit to provide evidence of how you have attained the professional engineering practice exposure required by Engineers Australia. Note that this unit is zero-credits and hence is no cost to you.

Available units
Students must complete the following compulsory units:
ENEP14004	Engineering Practice Experience

Intermediate Units

Available units
Students must complete the following compulsory units:
MATH11247	Foundation Mathematics
ENEG11009	Fundamentals of Sustainable Energy
ENEG12007	Creative Engineering
ENEE12014	Electrical Circuit Analysis
ENEE12015	Electrical Power Engineering
ENEE12016	Signals and Systems
ENEX12002	Introductory Electronics
MATH12225	Applied Computational Modelling
ENEG13002	Engineering Futures

Advanced Units

Please note that ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEX13002	Power Electronics
ENEE13016	Power System Protection
ENEE13019	Control Systems Analysis and Design
ENEE13021	Power System Analysis and Design
ENEE13022	Communication Technology
ENEE14005	Capstone Power and Control Design
ENEE14006	Embedded Microcontrollers
ENEE14007	Electrical Machines and Drives Applications

Electives

In addition to the units listed above, there is an elective slot in the electrical major. 

If you opt-out of the MATH11247 Foundation Mathematics unit you are required to complete an additional 6cp elective.

There is a pre-approved set of electives listed in the Course Planner (the link is in the More Details tab). Should you wish to complete an elective not on the pre-approved list, contact the Head of Course to discuss.

Capstone Project

At the end of the bachelor of engineering component of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Engineering Project Management

In addition to the engineering project units ENEG14003 and ENEG14005, you will complete the following project management units which together make up the Master of Engineering Project Management qualification.

Available units
Students must complete the following compulsory units:
PPMP20007	Project Management Concepts
PPMP20008	Initiating and Planning Projects
PPMP20009	Leading Lean Projects
PPMP20010	Executing and Closing Projects
PPMP20011	Contract and Procurement Management
PPMP20012	Portfolio and Program Management
PPMP20015	Research Proposal
PPMP20016	Research Project 2

Engineering Professional Practice

This course has 480 hours (including a minimum of 240 hours of industry experience) of Engineering Professional Practice requirement prior to graduation. 'Undergraduate Engineering Course' Moodle meta-site will provide you with information about the work experience requirements of the accreditation body, the evidence you need to collect and information on how to create the ePortfolio that you will use to accumulate evidence of your professional practice exposure throughout the course of study. In one of the later terms of study, after you have completed your professional practice requirements, you must enrol into the following unit to provide evidence of how you have attained the professional engineering practice exposure required by Engineers Australia. Note that this unit is zero-credits and hence is no cost to you.

Available units
Students must complete the following compulsory units:
ENEP14004	Engineering Practice Experience

Intermediate units

Available units
Students must complete the following compulsory units:
ENEG11009	Fundamentals of Sustainable Energy
MATH11247	Foundation Mathematics
ENEG12007	Creative Engineering
ENEM12009	Structural Mechanics
ENEM12010	Engineering Dynamics
MATH12225	Applied Computational Modelling
ENEM12008	Solid Materials Handling
ENEM12006	Fluid Mechanics
ENEG13002	Engineering Futures

Advanced units

Please note that ENEM14014, ENEM14015 and ENEM14016 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEM13012	Maintenance Engineering
ENEM13018	Materials and Manufacturing
ENEM13015	Design of Machine Elements
ENEM14011	Energy Conversion
ENEM13019	Fluid Machinery
ENEM14015	Dynamic System Modelling and Control
ENEM14014	Capstone Thermofluid Engineering
ENEX13003	Mechanical Design Practice
ENEM13014	Thermodynamics

Electives

In addition to the units listed above, there are elective slots in the mechanical major. 

If you opt-out of the MATH11247 Foundation Mathematics unit you are required to complete an additional 6cp elective.

There is a pre-approved set of electives listed in the Course Planner (the link is in the More Details tab). Should you wish to complete an elective not on the pre-approved list, contact the Head of Course to discuss.

Capstone Project

At the end of the bachelor of engineering component of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Engineering Project Management

In addition to the engineering project units ENEG14003 and ENEG14005, you will complete the following project management units which together make up the Master of Engineering Project Management qualification.

Available units
Students must complete the following compulsory units:
PPMP20007	Project Management Concepts
PPMP20008	Initiating and Planning Projects
PPMP20009	Leading Lean Projects
PPMP20010	Executing and Closing Projects
PPMP20011	Contract and Procurement Management
PPMP20012	Portfolio and Program Management
PPMP20015	Research Proposal
PPMP20016	Research Project 2

Engineering Professional Practice

This course has 480 hours (including a minimum of 240 hours of industry experience) of Engineering Professional Practice requirement prior to graduation. 'Undergraduate Engineering Course' Moodle meta-site will provide you with information about the work experience requirements of the accreditation body, the evidence you need to collect and information on how to create the ePortfolio that you will use to accumulate evidence of your professional practice exposure throughout the course of study. In one of the later terms of study, after you have completed your professional practice requirements, you must enrol into the following unit to provide evidence of how you have attained the professional engineering practice exposure required by Engineers Australia. Note that this unit is zero-credits and hence is no cost to you.

Available units
Students must complete the following compulsory units:
ENEP14004	Engineering Practice Experience

Intermediate Units

Available units
Students must complete the following compulsory units:
ENEG11009	Fundamentals of Sustainable Energy
ENEG12007	Creative Engineering
ENEE12014	Electrical Circuit Analysis
MATH12225	Applied Computational Modelling
ENEX12002	Introductory Electronics
ENEM12010	Engineering Dynamics
ENEE12016	Signals and Systems
ENEX12001	Electrical Power and Machines
ENEM12009	Structural Mechanics
ENEG13002	Engineering Futures

Advanced Units

Please note that ENEX14001 Mechatronics Systems Design and ENEE14006 Embedded Microcontrollers are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEX13001	Industrial Control and Automation
ENEX13002	Power Electronics
ENEX13003	Mechanical Design Practice
ENEX13004	Robotics and Autonomous Systems
ENEE13019	Control Systems Analysis and Design
ENEX13005	Machine Design and Vibrations
ENEX13006	Thermofluids Theory and Applications
ENEE14006	Embedded Microcontrollers
ENEX14001	Mechatronics Systems Design

Capstone Project

At the end of the bachelor of engineering component of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Engineering Project Management

In addition to the engineering project units ENEG14003 and ENEG14005, you will complete the following project management units which together make up the Master of Engineering Project Management qualification.

Available units
Students must complete the following compulsory units:
PPMP20007	Project Management Concepts
PPMP20008	Initiating and Planning Projects
PPMP20009	Leading Lean Projects
PPMP20010	Executing and Closing Projects
PPMP20011	Contract and Procurement Management
PPMP20012	Portfolio and Program Management
PPMP20015	Research Proposal
PPMP20016	Research Project 2

Engineering Professional Practice

This course has 480 hours (including a minimum of 240 hours of industry experience) of Engineering Professional Practice requirement prior to graduation. 'Undergraduate Engineering Course' Moodle meta-site will provide you with information about the work experience requirements of the accreditation body, the evidence you need to collect and information on how to create the ePortfolio that you will use to accumulate evidence of your professional practice exposure throughout the course of study. In one of the later terms of study, after you have completed your professional practice requirements, you must enrol into the following unit to provide evidence of how you have attained the professional engineering practice exposure required by Engineers Australia. Note that this unit is zero-credits and hence is no cost to you.

Available units
Students must complete the following compulsory units:
ENEP14004	Engineering Practice Experience

Intermediate Units

Available units
Students must complete the following compulsory units:
ENEG11009	Fundamentals of Sustainable Energy
COIT11222	Programming Fundamentals
COIT11226	Systems Analysis
ENEC12009	Engineering Surveying and Spatial Sciences
COIT11237	Database Design & Implementation
ENAR12014	Introduction to Mining Technology
ENAR12016	Earth Science
ENEE12014	Electrical Circuit Analysis
ENEE12016	Signals and Systems
ENEX12002	Introductory Electronics

Advanced Units

Please note that ENER14001 Resource Systems Automation Project and ENER14002 Resource Systems Feasibility Project are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENAR12006	Rock Engineering
ENAR12013	Mine Planning and Design
ENAR12004	Mine Management and Safety
COIT12209	Data Science
ENEX13001	Industrial Control and Automation
ENER14001	Resource Systems Automation Project
ENER14002	Resource Systems Feasibility Project
ENAR13001	Economic Geology

Electives

In addition to the units listed above, there is an elective slot in the resource systems major. 

There is a pre-approved set of electives listed in the Course Planner (the link is in the More Details tab). Should you wish to complete an elective not on the pre-approved list, contact the Head of Course to discuss.

Capstone Project

At the end of the bachelor of engineering component of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

Engineering Project Management

In addition to the engineering project units ENEG14003 and ENEG14005, you will complete the following project management units which together make up the Master of Engineering Project Management qualification.

Available units
Students must complete the following compulsory units:
PPMP20007	Project Management Concepts
PPMP20008	Initiating and Planning Projects
PPMP20009	Leading Lean Projects
PPMP20010	Executing and Closing Projects
PPMP20011	Contract and Procurement Management
PPMP20012	Portfolio and Program Management
PPMP20015	Research Proposal
PPMP20016	Research Project 2

Engineering Professional Practice

This course has 480 hours (including a minimum of 240 hours of industry experience) of Engineering Professional Practice requirement prior to graduation. 'Undergraduate Engineering Course' Moodle meta-site will provide you with information about the work experience requirements of the accreditation body, the evidence you need to collect and information on how to create the ePortfolio that you will use to accumulate evidence of your professional practice exposure throughout the course of study. In one of the later terms of study, after you have completed your professional practice requirements, you must enrol into the following unit to provide evidence of how you have attained the professional engineering practice exposure required by Engineers Australia. Note that this unit is zero-credits and hence is no cost to you.

Available units
Students must complete the following compulsory units:
ENEP14004	Engineering Practice Experience