AVAT12006 - Commercial Pilot Licence Aerodynamics & Aircraft General Knowledge

General Information

Unit Synopsis

This unit will provide you with the knowledge of aerodynamics relevant for low altitude, sub-sonic flight in piston engine aircraft and the knowledge of small commercial aircraft power plants and systems. You will cover the aeronautical knowledge requirements of the Civil Aviation Safety Authority Commercial Pilot Licence aerodynamics as well as the General Aeronautical Knowledge syllabus. You will study the aerodynamic properties of an aerofoil and how it produces lift and drag. You will also study the forces and moments acting on an aeroplane in flight and how these affect an aeroplane's stability and controllability. Normal and abnormal flight characteristics and performance will also be studied. Topics you will study in depth include piston engine power plants and propellers. You will learn about aircraft electrical and hydraulic systems, fuel systems, and ice and rain protection systems. You will also become familiar with flight and navigation instruments.

Details

Level Undergraduate
Unit Level 2
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

Students must meet all requisites:

1. AVAT11002 Basic Aeronautical Knowledge OR (AVAT11012 Aviation Practice AND AVAT11013 Introduction to Aviation); AND

2. AVAT11005 Flight Fundamentals; AND

3. AVAT11010 Aviation Safety Fundamentals OR AVAT11007 Flight Planning, Performance, and Operation.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 1 - 2023

Term 1 - 2023 Profile
Brisbane
Bundaberg
Cairns
Online
Perth
Term 1 - 2024 Profile
Cairns
Online
Term 2 - 2024 Profile
Term 3 - 2024 Profile
Cairns
Online

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 20%
2. Online Quiz(zes) 20%
3. Examination 60%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

Term 1 - 2022 : The overall satisfaction for students in the last offering of this course was 50.00% (`Agree` and `Strongly Agree` responses), based on a 5.41% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Student feedback
Feedback
Written Assignment. The expectations and best practice regarding the presentation of the assignment could be made more explicit.
Recommendation
Provide guidance on report writing to students in the first-year units.
Action Taken
None at all as far as I know. I do not have the power to implement this.
Source: Student feedback
Feedback
Learning resources were sufficient, relevant covering all topics.
Recommendation
Agree and further improvements will be made.
Action Taken
Extra references were given this year.
Source: Lecture and email
Feedback
Require more worked examples
Recommendation
Add more worked examples and discuss them in tutorials.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Explain the aerodynamic properties of an aerofoil
  2. Apply the Coanda effect and Bernoulli's theorem to demonstrate and calculate how an aerofoil produces lift and drag
  3. Examine the forces and moments acting on an aircraft in all stages of flight
  4. Discuss the factors that affect the stability and control of an aircraft in flight
  5. Determine the performance aspects of power, weight, and speed in flight maneuvers
  6. Explain the factors that affect the stall and spin characteristics of an aeroplane.

N/A. No external accreditation.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6
1 - Written Assessment
2 - Online Quiz(zes)
3 - Examination
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10