Click Here to view current information
Unit Synopsis
Construction Fundamentals 3 (Carpentry) will introduce you to the procedures, principles and methods of low-rise timber frame construction used for residential buildings and other structures classified by the National Construction Code (NCC) as Building Class 1 or 10. You will learn common terms used in residential low-rise timber frame construction. You will complete practical components on-campus that will provide you with the foundations of theory application in these constructions.
Details
| Level | Undergraduate |
|---|---|
| Unit Level | 1 |
| Credit Points | 6 |
| Student Contribution Band | SCA Band 2 |
| Fraction of Full-Time Student Load | 0.125 |
| Pre-requisites or Co-requisites |
There are no pre-requisites for the unit.
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework). |
| Class Timetable | View Unit Timetable |
| Residential School | No Residential School |
Unit Availabilities from Term 2 - 2020
Term 2 - 2020 Profile
Attendance Requirements
All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Assessment Tasks
| Assessment Task | Weighting |
|---|---|
| 1. Portfolio | 100% |
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).
Past Exams
All University policies are available on the Policy web site, however you may wish to directly view the following policies below.
This list is not an exhaustive list of all University policies. The full list of policies are available on the Policy web site.
No previous feedback available
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Source: Lecturer reflection
The unit is a blend of practical skills and case study research which produce an end-of-term portfolio.
Progressive inspection of the portfolio should be introduced to ensure a measured completion of the task to avoid a spike in workload at the end of the term.
Unit profile reflects recommendation.
Source: Lecturer reflection
Consider lowering current course entry from op14/ sr68.
Reset entry level to op18/sr61.
In Progress
On successful completion of this unit, you will be able to:
- Formulate a satisfactory design response to the predicted forces acting on residential low-rise timber frame construction
- Explain the common terms used in residential low-rise timber frame construction
- Describe the construction process related to principal structural and non-structural elements for residential low-rise timber frame construction
- Discuss the plant selection and processes used for residential low-rise timber frame construction
- Demonstrate teamwork skills and collaboration to complete construction tasks.
| Assessment Tasks | Learning Outcomes | ||||
|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | |
| 1 - Portfolio | • | • | • | • | • |
| Graduate Attributes | Learning Outcomes | ||||
|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | |
| 1 - Communication | • | • | • | • | |
| 2 - Problem Solving | • | • | • | • | |
| 3 - Critical Thinking | • | • | • | ||
| 5 - Team Work | • | ||||
| 8 - Ethical practice | • | ||||
| Assessment Tasks | Graduate Attributes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 10 | |
| 1 - Portfolio | • | • | • | • | • | ||||||