BLAR13054 - Complex Construction

General Information

Unit Synopsis

This unit will introduce you to the procedures, principles and methods of construction used for complex projects up to "super tall" buildings (over 300m in height) and designated by the National Construction Code (NCC) as being within Building Class 2 to 9. You should have completed an intermediate construction unit to ensure adequate level of entry knowledge. Students who have successfully completed BLAR13049 should not enrol in this unit.

Details

Level Undergraduate
Unit Level 3
Credit Points 6
Student Contribution Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

Pre-requisite: BLAR12057 Commercial Construction or BLAR11048 Construction 2.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 1 - 2019

Term 1 - 2019 Profile
Online

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 20%
2. Written Assessment 40%
3. Written Assessment 30%
4. Online Quiz(zes) 10%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams, please login
Previous Feedback

No previous feedback available

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Unit Evaluation survey.
Feedback
The time-frame for return of marked assessment was a little too long (3 weeks).
Recommendation
Timely assessment feedback and communication is considered essential to student satisfaction and effective learning outcomes. Lecturers are being reminded of their obligations in relation to these matters and it is expected that this process will improve outcomes in this area.
Action Taken
Nil.
Source: Unit Evaluation survey.
Feedback
Assignments were in depth and supported my learning. Feedback supported my learning and helped for future assignments.
Recommendation
The unit lecturer is an industry practitioner who brings this experience to the unit. This experience is reflected in this comment and the benefits such practitioners bring to authentic learning supports the continued use of industry practitioners as casual lecturers.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Plan the temporary works, particularly scaffolding, formwork and falsework and plant selection processes used for complex or "super tall" construction.
  2. Describe the functions, materials and details of the major components. the waste management strategies used and the regulatory inspections made when constructing a complex or "super tall" project.
  3. Diagnose and plan the rectification of common building faults.
  4. Explain the issues encountered by complex or "super tall" buildings including funding, ownership, design and construction.
  5. Discuss the development and implementation of innovative building practices.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5
1 - Written Assessment
2 - Written Assessment
3 - Written Assessment
4 - Online Quiz(zes)
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9
1 - Written Assessment
2 - Written Assessment
3 - Written Assessment
4 - Online Quiz(zes)