ENEC14014 - Structural and Geotechnical Design

General Information

Unit Synopsis

In this unit, you will analyse, design and prepare documentation for major civil engineering projects involving a broad range of investigation and design activities. You will establish project requirements and determine design loads and conditions, analyse structures and design components using Australian Standards and/or relevant guidance. You will use commercial computer software to analyse and design the structures with various design actions; conduct site investigations, test and characterise geotechnical materials, design foundations and earth retaining structures, and make assessments of geotechnical stability. In this unit, you are expected to document the process of modelling, testing and analysis, and communicate, work and learn, both individually and in teams, in a professional manner. If you are enrolled in online mode, you will be required to attend a residential school during the term.

Details

Level Undergraduate
Unit Level 4
Credit Points 12
Student Contribution Band 2
Fraction of Full-Time Student Load 0.25
Pre-requisites or Co-requisites

Prerequisite: (ENEC12012 Stress Analysis or ENEC13010 Solid Mechanics) AND ENEC12008 Geotechnical Engineering AND (ENEC13015 Steel & Timber Design or ENEC13011 Steel Structures) AND (ENEC13016 Concrete Technology & Design or ENEC14013 Concrete Structures)

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School Compulsory Residential School
View Unit Residential School

Unit Availabilities from Term 1 - 2020

Term 1 - 2020 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2021 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 12-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Portfolio 50%
2. Portfolio 30%
3. Oral Examination 20%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams, please login
Previous Feedback

No previous feedback available

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Moodle
Feedback
The unit was structured well and the content covered in a way to ensure easy learning.
Recommendation
The practice will continue in the next offer.
Action Taken
Done
Source: Moodle
Feedback
Lecturers are very helpful and available for consultation.
Recommendation
The practice will continue in the next offer.
Action Taken
Done
Source: Moodle
Feedback
It is helpful if the assessment items are returned early.
Recommendation
As we have multiple lecturers and assessment items, there were some delays this year. This will be resolved in the next offering.
Action Taken
Done
Source: Moodle
Feedback
The unit was structured well and the content covered in a way to ensure easy learning.
Recommendation
This practice will continue in the next offer as well.
Action Taken
Nil.
Source: Moodle
Feedback
Unit content is very useful and able to link with real-life problems.
Recommendation
This is a final year unit. Therefore, the unit content and assessments were set to reflect the real-life problems and the applications of basic theories in the design practice.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Demonstrate a commitment to ethical practice by promoting principals of sustainable development and awareness of stakeholder requirements
  2. Determine and justify loads and load combinations for a structural system
  3. Analyse and design concrete and masonry structural components using appropriate Australian Standards
  4. Describe and apply site investigation and geotechnical testing techniques to characterise sites and geotechnical materials based on Australian Standards
  5. Analyse and design foundations and earth retaining structures and assess stability of slopes
  6. Accurately model and analyse structural and geotechnical systems using industry-standard software and Australian Standards.

The Learning Outcomes for this unit are linked with Engineers Australia's Stage 1 Competency Standard for Engineering Technologist and Professional Engineers.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6
1 - Portfolio
2 - Portfolio
3 - Oral Examination
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9
1 - Portfolio
2 - Portfolio
3 - Oral Examination