Geotechnical Engineering Design will enable you to develop and apply your knowledge of Australian Standards and/or relevant guidance to analyse and design advanced geotechnical engineering structures involving a broad range of investigations. You will also learn to use computer software to analyse and design the geotechnical components; conduct site investigations, test and characterise geotechnical materials, design foundations and earth retaining structures; and make assessments of geotechnical stability. You will also formulate, plan, manage and complete projects individually and in teams in an ethical and professional manner by considering stakeholders and sustainability requirements. You will also document and communicate engineering information using appropriate language for a professional engineer. If you are enrolled in distance mode, you will be required to attend a compulsory residential school during the term.
|Student Contribution Band||2|
|Fraction of Full-Time Student Load||0.25|
|Pre-requisites or Co-requisites||
Anti-Requisite: ENEC14014 Structural and Geotechnical Design
|Class Timetable||View Unit Timetable|
Compulsory Residential School
View Unit Residential School
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Each 12-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
|1. Written Assessment||30%|
|2. Written Assessment||20%|
|3. Practical Assessment||20%|
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).
All University policies are available on the Policy web site, however you may wish to directly view the following policies below.
This list is not an exhaustive list of all University policies. The full list of policies are available on the Policy web site .
No previous feedback available
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
On successful completion of this unit, you will be able to:
The Learning Outcomes for this unit are linked with Engineers Australia's Stage 1 Competency Standard for Professional Engineers.
|Assessment Tasks||Learning Outcomes|
|1 - Written Assessment||•||•||•|
|2 - Written Assessment||•||•|
|3 - Practical Assessment||•||•|
|4 - Examination||•||•|
|Graduate Attributes||Learning Outcomes|
|1 - Knowledge||•||•||•||•||•|
|2 - Communication||•||•||•||•||•|
|3 - Cognitive, technical and creative skills||•||•||•||•||•|
|4 - Research||•||•||•||•||•|
|5 - Self-management||•||•|
|6 - Ethical and Professional Responsibility||•||•||•||•||•|
|7 - Leadership||•||•|
|Assessment Tasks||Graduate Attributes|
|1 - Written Assessment||•||•||•||•||•||•||•|
|2 - Written Assessment||•||•||•||•||•||•|
|3 - Practical Assessment||•||•||•||•||•||•|
|4 - Examination||•||•||•||•||•|