ENEE13016 - Power System Protection

General Information

Unit Synopsis

In this unit, you will analyse and design devices and schemes to protect electrical power apparatus and systems. You will explain the philosophy, principles, concepts and practices, the codes, standards and refer to manuals that guide the design and operation of protection schemes. You will also analyse protection schemes, solve protection problems and correct faults. You will identify requirements, analyse and design protection for power system networks and for apparatus in electrical power systems. You will develop fluency in the technical language of power systems protection and develop the professional skills needed to communicate, learn and work alone and collaboratively to solve problems and document the solution process.

Details

Level Undergraduate
Unit Level 3
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites
ENEE12015 Electrical Power Engineering or ENEE12004 Introduction to Power Systems or ENTE12005 Electrical Power Systems.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 1 - 2025

Term 1 - 2025 Profile
Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

This information will not be available until 8 weeks before term.
To see assessment details from an earlier availability, please search via a previous term.

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University's Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

Term 1 - 2024 : The overall satisfaction for students in the last offering of this course was 50.00% (`Agree` and `Strongly Agree` responses), based on a 16.67% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Student evaluation (SUTE)
Feedback
The content was well organised and structured.
Recommendation
The same structure in the unit should be maintained.
Action Taken
Maintained the same content.
Source: Student evaluation (SUTE)
Feedback
Assessments were relevant.
Recommendation
It should be continued with a similar type of assessment.
Action Taken
Similar type of assessments were used.
Source: Student evaluation (SUTE) & In Class
Feedback
The unit was well delivered.
Recommendation
The same practice should be continued.
Action Taken
Similar delivery practice was adopted.
Source: SUTE
Feedback
Unit coordinator was very helpful and approachable.
Recommendation
This practice should be continued.
Action Taken
In Progress
Source: SUTE
Feedback
Students learned a lot from attending tutorial sessions.
Recommendation
Tutorial sessions should be used to further the student's learning and engagement with the unit content.
Action Taken
In Progress
Source: SUTE
Feedback
Students expected detailed feedback for assessment items.
Recommendation
Detailed feedback should be given to assessments.
Action Taken
In Progress
Source: SUTE
Feedback
Students expected detailed information on unit assessment items.
Recommendation
Assessment items should be elaborated in detail during the lecture/tutorial sessions.
Action Taken
In Progress
Unit learning Outcomes
This information will not be available until 8 weeks before term.
To see Learning Outcomes from an earlier availability, please search via a previous term.