ENEE13021 - Power System Analysis and Design

General Information

Unit Synopsis

On the satisfactory completion of this unit, you will be able to work both individually and in a team to model, analyse and investigate design and operation options for electrical power networks to meet community service requirements. You will be able to analyse the steady-state performance of power systems, perform both symmetrical and unsymmetrical fault calculations, and conduct stability analysis of power systems. You will be using the industry standard power system simulation software to simulate different scenarios in the power network. As such, you will articulate the process of updating and maintaining power network assets to meet most safety, reliability, and quality requirements for both the present and future.

Details

Level Undergraduate
Unit Level 3
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites
ENEE12015 Electrical Power Engineering. 

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 2 - 2025

Term 2 - 2025 Profile
Bundaberg
Cairns
Gladstone
Mackay
Online
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

This information will not be available until 8 weeks before term.
To see assessment details from an earlier availability, please search via a previous term.

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University's Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

Term 2 - 2022 : The overall satisfaction for students in the last offering of this course was 0.00% (`Agree` and `Strongly Agree` responses), based on a 22.22% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: SUTE
Feedback
Content is relevant to the studies.
Recommendation
This good practice should be continued.
Action Taken
In Progress
Source: SUTE
Feedback
Response time for student queries must be improved.
Recommendation
Timely responses to student queries should be maintained.
Action Taken
In Progress
Source: SUTE
Feedback
Quality of the learning materials needs to be improved.
Recommendation
Quality of the learning materials should be improved.
Action Taken
In Progress
Source: SUTE
Feedback
Students have questioned the relevance of the assessment tasks to their learning.
Recommendation
Assessment tasks should be reviewed and improved.
Action Taken
In Progress
Source: SUTE
Feedback
Students have questioned the useful knowledge/skill gained from the unit
Recommendation
During the lectures how the taught content is used in industry should be explained
Action Taken
In Progress
Unit learning Outcomes
This information will not be available until 8 weeks before term.
To see Learning Outcomes from an earlier availability, please search via a previous term.