Click Here to view current information
Unit Synopsis
This unit will introduce you to microcontroller basics and their real-world applications. Fundamentals of high-level structured language programming, essential for programming a microcontroller, will be taught in this unit. You will learn about different microcontroller families and their similarities and differences from an application point of view. You will also learn about microcontroller architecture, memory maps, addressing modes, interrupts, timers, counters, and hardware interfacing of a chosen microcontroller. You will learn how to program a microcontroller in a high-level language using an integrated development environment. Advance topics of reading analog inputs, implementation of Universal Synchronous Asynchronous Receiver Transmitter connections with the external world, Pulse Width Modulation, will also be covered in this unit. After learning the fundamentals of hardware interfacing you will practice them in a laboratory using a microcontroller development system based on a specific microcontroller and finally design and prototype a real-world application of the embedded system in your project using the same development system. Online students are required to attend the Residential School.
Details
| Level | Undergraduate |
|---|---|
| Unit Level | 4 |
| Credit Points | 12 |
| Student Contribution Band | SCA Band 2 |
| Fraction of Full-Time Student Load | 0.25 |
| Pre-requisites or Co-requisites |
Prerequisite: (ENEE13020 Digital Electronics AND ENEE13018 Analogue Electronics) OR ENEX12002 Introductory Electronics Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework). |
| Class Timetable | View Unit Timetable |
| Residential School |
Compulsory Residential School View Unit Residential School |
Unit Availabilities from Term 1 - 2019
Term 1 - 2019 Profile
Term 2 - 2019 Profile
Term 1 - 2020 Profile
Term 2 - 2020 Profile
Term 1 - 2021 Profile
Term 2 - 2021 Profile
Term 1 - 2022 Profile
Term 2 - 2022 Profile
Term 1 - 2023 Profile
Term 2 - 2023 Profile
Term 1 - 2024 Profile
Term 2 - 2024 Profile
Term 1 - 2025 Profile
Term 2 - 2025 Profile
Term 1 - 2026 Profile
Attendance Requirements
All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 12-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
Assessment Tasks
| Assessment Task | Weighting |
|---|---|
| 1. Written Assessment | 25% |
| 2. Written Assessment | 25% |
| 3. Portfolio | 50% |
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).
Past Exams
All University policies are available on the Policy web site, however you may wish to directly view the following policies below.
This list is not an exhaustive list of all University policies. The full list of policies are available on the Policy web site.
No previous feedback available
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Source: Student and Unit Teaching Evaluations (SUTE)
The participation rate of students in the end-of-term Student and Unit Teaching Evaluations (SUTE) survey is very low.
Students should be encouraged to participate in the Student and Unit Teaching Evaluations (SUTE) surveys.
Students were encouraged to participate in the Student and Unit Evaluation (SUTE) during live sessions and through Moodle announcements.
Source: Student Unit and Teaching Evaluations (SUTE) Survey
Students requested greater clarity in the unit and assessment requirements.
Unit and assessment requirements should be discussed in detail during weekly workshop sessions.
In Progress
Source: Student Unit and Teaching Evaluations (SUTE) Survey
Some students are seeking detailed feedback.
Individual sessions should be organised to provide verbal feedback for students seeking additional feedback.
In Progress
On successful completion of this unit, you will be able to:
- Apply fundamental structured programming knowledge to develop software solutions
- Program a microcontroller to interface with external devices such as analog and digital sensors, actuators and computers
- Analyse and design microcontroller based real-time applications using a given industry standard development system and software tools
- Prototype an embedded microcontroller system for an authentic application
- Communicate professionally using relevant technical terminology, symbols, and diagrams and effectively document design and prototyped solutions
- Work autonomously and as a team member to analyse problems and present solutions.
The Learning Outcomes for this unit are linked with Engineers Australia's Stage 1 Competency Standard for Professional Engineers.
| Assessment Tasks | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Written Assessment | • | |||||
| 2 - Written Assessment | • | • | • | • | ||
| 3 - Portfolio | • | • | • | • | • | • |
| Graduate Attributes | Learning Outcomes | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 1 - Communication | • | • | • | • | • | • |
| 2 - Problem Solving | • | • | • | • | • | • |
| 3 - Critical Thinking | • | • | • | • | • | • |
| 4 - Information Literacy | • | • | • | • | • | • |
| 5 - Team Work | • | • | • | • | • | |
| 6 - Information Technology Competence | • | • | • | • | • | • |
| 7 - Cross Cultural Competence | • | • | • | |||
| 8 - Ethical practice | • | • | • | • | • | • |
| Assessment Tasks | Graduate Attributes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 10 | |
| 1 - Written Assessment | • | • | • | • | • | • | |||||
| 2 - Written Assessment | • | • | • | • | • | • | |||||
| 3 - Portfolio | • | • | • | • | • | • | • | ||||