ENEE20002 - Advanced Electrical Machines and Drives

General Information

Unit Synopsis

The objective of this unit is to introduce you to advanced electrical machines, drives and their control. You will learn about dynamic modelling of various types of DC and AC electrical machines. The unit will also introduce you to space vector theory associated with dynamic modelling of AC electrical machines. You will also learn about DC and AC motor drives. The unit will enable you to apply vector control fundamentals in electrical machine control. You will also learn some advanced topics such as speed-sensorless control of electrical machines. You will be required to successfully complete an electrical machines and drives design team project. Online students will be required to attend a compulsory residential school in order to complete the laboratory experiments. Prior knowledge of the fundamental concepts of electrical circuit analysis and electrical power engineering is assumed.

Details

Level Postgraduate
Unit Level 9
Credit Points 12
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.25
Pre-requisites or Co-requisites
ENEE14007 Electrical Machines and Drives Applications is an Anti-Requisite for this unit.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 1 - 2025

Term 1 - 2025 Profile
Melbourne
Online
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 12-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.

Assessment Tasks

This information will not be available until 8 weeks before term.
To see assessment details from an earlier availability, please search via a previous term.

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University's Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

Term 1 - 2023 : The overall satisfaction for students in the last offering of this course was 60.00% (`Agree` and `Strongly Agree` responses), based on a 71.43% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Unit Evaluation Report
Feedback
Students indicated the need for better explanations of certain topics
Recommendation
Provide detail explanation with practical examples during lecture time. Unit should be provided with additional resources to better understand difficult topics.
Action Taken
Real-life examples were introduced in this unit to improve the unit's resources. These examples were discussed in detail in the lectures for students understanding.
Source: Unit Evaluation Report
Feedback
Some unit requirements were not clear
Recommendation
Unit requirements should be reviewed and presented with clear advice in the next offering.
Action Taken
The unit requirements were reviewed and the applications in the engineering industry were presented.
Source: Unit Evaluation Report
Feedback
Students highlighted the need for more detailed feedback in some instances
Recommendation
Assessment feedback should contain sufficient information so that students can learn from their previous mistakes and improve on subsequent submissions. Feedback for Online Quizzes should contain sufficient scaffolding to improve learning.
Action Taken
Students were provided with detailed feedback on the assessment items including the online quiz, which included justification of the provided marks.
Source: Unit Evaluation Report
Feedback
Students indicated that they got useful learning resources (as PDF documents)
Recommendation
The use of industry-relevant resources should be continued in the next offering.
Action Taken
In Progress
Source: Unit Evaluation Report
Feedback
Students highlighted that they are happy with the clarity and support for the unit
Recommendation
Industry-relevant resources should be provided for better understanding in the next offering.
Action Taken
In Progress
Source: Unit Evaluation Report
Feedback
Student expected further clarification on few topics.
Recommendation
More detail explanations should be provided with real life examples.
Action Taken
In Progress
Unit learning Outcomes
This information will not be available until 8 weeks before term.
To see Learning Outcomes from an earlier availability, please search via a previous term.