Viewing Unit History

The information below is relevant from 06/03/2017 to 10/03/2019
Click Here to view current information

ENEM14011 - Energy Conversion

General Information

Unit Synopsis

This unit introduces you to key concepts and principles required to analyse problems involving heat exchange and energy conversion. You will analyse and design heat exchangers and analyse performance of compressors, internal combustion engines, gas turbines and jet propulsion. You will analyse combustion processes and estimate pollutant emissions, and analyse and design nozzles to promote safe and efficient combustion. You will prepare technical reports that demonstrate critical evaluation of results and experimental uncertainties. You are required to show your ability to work productively, both individually and collaboratively, to solve problems, and document and communicate their work clearly in a professional manner. On-campus students will be required to attend laboratory sessions to promote development of unit learning outcomes. Distance students will be required to attend a residential school to promote development of unit learning outcomes.

Details

Level Undergraduate
Unit Level 4
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

Prereq: ENEM13014 Thermodynamics or ENEM12003 Thermodynamics

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School Compulsory Residential School
View Unit Residential School

Unit Availabilities from Term 3 - 2018

Term 1 - 2019 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2020 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2021 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton
Term 1 - 2022 Profile
Bundaberg
Cairns
Gladstone
Mackay
Mixed Mode
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Written Assessment 25%
2. Practical and Written Assessment 25%
3. Examination 50%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University’s Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams, please login
Previous Feedback

Term 1 - 2021 : The overall satisfaction for students in the last offering of this course was 4.5 (on a 5 point Likert scale), based on a 57.69% response rate.

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Unit Evaluation
Feedback
This unit content was interesting and taught well.
Recommendation
This practice will be continued.
Action Taken
Nil.
Source: Unit Evaluation
Feedback
The weekly quizzes were good and they helped the learning process. The subject covered several interesting topics and provided sufficient time to learn them.
Recommendation
This practice will be continued.
Action Taken
Nil.
Source: Unit Evaluation
Feedback
The exam was challenging and was within the content taught.
Recommendation
This practice will be continued.
Action Taken
Nil.
Source: Unit Evaluation
Feedback
The FDM component of the assignment provided great insight into an industry problem and to the capabilities of Excel/Matlab. It has facilitated deep learning in the topic.
Recommendation
This practice will be continued.
Action Taken
Nil.
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Explain principles of heat transfer and conversion between heat energy and mechanical power and apply these principles to solution of heat transfer and energy conversion problems
  2. Analyse, design and explain the performance of heat exchangers
  3. Analyse and explain the performance of compressors, internal combustion engines, gas turbines and jet propulsion
  4. Analyse and explain combustion processes and estimate pollutant emissions for internal combustion engines and gas turbines
  5. Analyse, design and explain nozzles to promote safe and efficient combustion
  6. Demonstrate individual capability to analyse, solve and explain energy conversion problems

This core Unit in the Mechanical Engineering course will help students meet the Engineers Australia's stage One Competencies by the completion of the degree.


Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6
1 - Written Assessment
2 - Practical and Written Assessment
3 - Examination
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
6 - Information Technology Competence
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9
1 - Written Assessment
2 - Practical and Written Assessment
3 - Examination