This unit will introduce you to supervisory control and data acquisition(SCADA) system design and development using industry standard SCADA software. You will also learn how to analyse system requirements for a given mechatronics system task, evaluate and select mechatronics modules and components from a pool of mechatronics modules and components. You will design custom components and fabricate them, develop concept designs and select the best option, design and develop a mechatronics solution for a given complex task. You will also program the developed mechatronics system using industry standard programmable logic controller (PLC) and SCADA software, and commission the system. Students enrolled in distance mode are required to attend a compulsory Residential School.
|Student Contribution Band||SCA Band 2|
|Fraction of Full-Time Student Load||0.25|
|Pre-requisites or Co-requisites||
Prerequisites: ENEX13001 Instrumentation and Industrial Automation AND ENEX13003 Design of Mechatronics Elements
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
|Class Timetable||View Unit Timetable|
Compulsory Residential School
View Unit Residential School
All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Each 12-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.
|1. Written Assessment||25%|
|2. Practical Assessment||25%|
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).
All University policies are available on the Policy web site, however you may wish to directly view the following policies below.
This list is not an exhaustive list of all University policies. The full list of policies are available on the Policy web site .
Term 1 - 2020 : The overall satisfaction for students in the last offering of this course was 4.3 (on a 5 point Likert scale), based on a 66.67% response rate.
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
On successful completion of this unit, you will be able to:
Learning outcomes are linked to Engineers Australia Stage 1 Competencies and also discipline capabilities. You can find the mapping for this on the Engineering Undergraduate Course website.
|Assessment Tasks||Learning Outcomes|
|1 - Written Assessment||•||•||•||•||•|
|2 - Practical Assessment||•||•||•|
|3 - Portfolio||•||•||•||•||•||•|
|Graduate Attributes||Learning Outcomes|
|1 - Communication||•||•||•||•||•||•|
|2 - Problem Solving||•||•||•||•||•||•|
|3 - Critical Thinking||•||•||•||•||•||•|
|5 - Team Work||•||•||•||•|
|6 - Information Technology Competence||•||•||•||•||•||•|
|7 - Cross Cultural Competence||•||•||•||•|
|8 - Ethical practice||•||•||•||•||•||•|
|Assessment Tasks||Graduate Attributes|
|1 - Written Assessment||•||•||•||•||•||•||•|
|2 - Practical Assessment||•||•||•||•||•||•||•|
|3 - Portfolio||•||•||•||•||•||•||•|