Viewing Future Unit Information

The information below will be relevant from 06/03/2023.
Click Here to view current information

ENTA11018 - Aircraft Structural Maintenance Practices

General Information

Unit Synopsis

Aircraft are maintained using a wide variety of tools, following standard practices. This unit covers Module 7 - Maintenance Practices, of the European Aviation Safety Agency (EASA) Part 66 Aircraft Maintenance basic knowledge requirements syllabus. In this unit, you will develop knowledge and skills in the use of tools and standard practices that are required to be carried out with safety precautions as a high priority. You will also develop an understanding of engineering drawings, electrical wiring standards, aircraft handling, riveting, welding and soldering. A necessary part of this unit will be developing hand skills in these maintenance practices, using a variety of examples gaining practical experience with different types of procedures, components and systems. This unit is delivered at Aviation Australia campuses by Aviation Australia staff in partnership with CQUniversity.

Details

Level Undergraduate
Unit Level 1
Credit Points 12
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.25
Pre-requisites or Co-requisites There are no pre-requisites for the unit.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 3 - 2022

There are no availabilities for this unit on or after Term 3 - 2022

Attendance Requirements

All on-campus students are expected to attend scheduled classes – in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 12-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 25 hours of study per week, making a total of 300 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. In-class Test(s) 0%
2. Practical Assessment 0%
3. Practical Assessment 0%
4. Practical Assessment 0%
5. Practical Assessment 0%

This is a pass/fail (non-graded) unit. To pass the unit, you must pass all of the individual assessment tasks shown in the table above.

Past Exams

To view Past Exams, please login
Previous Feedback

No previous feedback available

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Describe safety precautions to be followed in the standard workshop activities, including knowledge and use of tools and test equipment
  2. Interpret engineering drawings and relevant standards to determine fits and clearances and other hardware inspection limits
  3. Explain the processes of riveting, welding, soldering, bonding and manufacture of mechanical control cables
  4. Describe electrical wiring interconnection systems standards used for the manufacture, installation, maintenance and repair of electrical wiring
  5. Explain aircraft handling and storage, and aircraft weight and balance, including actions to be taken after abnormal operational events
  6. Explain manufacture, inspection, repair, assembly and disassembly of pipes, hoses, springs, bearings and transmission systems
  7. Safely perform practical tasks with digital systems using simulation equipment and aircraft components, demonstrating the appropriate application of theory.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4 5 6 7
1 - In-class Test(s)
2 - Practical Assessment
3 - Practical Assessment
4 - Practical Assessment
5 - Practical Assessment
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4 5 6 7
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
6 - Information Technology Competence
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10