-
CQUni Phonebook CQUni Phonebook
-
User Quick links Profile
CQUni Handbook
Previous Version
Version Effective: 28th of April, 2022
AUR20516 - Certificate II in Automotive Servicing Technology
Course Details
Course Summary
Upon successful completion of this course you will have the skills and knowledge required to perform servicing and maintenance of vehicles in an automotive service or repair business. You will also develop your employability skills including communication, teamwork, problem-solving, initiative and enterprise, planning and organising, self-management and hands on skills relevant to the automotive industry. Your studies within this course will be assessment focused.
Entry Requirements
Completion of the bksb (Basic Key Skills Builder) online literacy and numeracy assessment prior to enrolment, unless the student has completed an equal or higher level course.
There are no other entry requirements for this course, however, it is highly recommended that students have attained a Sound Achievement (SA) result in year 10 numeracy and literacy subjects or equivalent prior to enrolling in this program.Course Details
| Course Type | Qualification |
|---|---|
| Student Availability |
|
| Fees | For detailed information on Course Fees, visit www.cqu.edu.au/fees |
| Application Mode |
|
| How to Apply | Please Enquire |
| Study Area |
|
| Skill Area |
|
| AQF Level | Level 2: Certificate II |
Admission Codes
|
Domestic Students Tertiary Admission Centre Codes (TAC) Codes |
Not Applicable |
|---|---|
|
International Students CRICOS Codes |
|
Student Outcomes, Career Opportunities and Occupations
This qualification is intended to prepare new employees or recognise and develop existing workers who are performing servicing and maintenance of vehicles in an automotive service or repair business.
Course Structures
In order to complete this course, you must:
- Complete 13 core units
- Complete 7 elective units
Study Mode Definitions
- Online: Online courses provide the flexibility to study without normally requiring a student to visit a campus. Course content is studied through a number of means including the use of online discussion forums, electronic library resources, by contacting lecturers and teachers, and receiving study materials online/electronically. Work integrated learning, including placements, may be included in some courses.
- On-campus: Students studying in on-campus mode typically are expected to attend and participate in regular, structured on-campus teaching and learning activities throughout the University’s academic term. These activities may include lectures, tutorials, workshops and practice, online or other activities and normally will be timetabled at a CQUniversity campus or approved delivery site.
- Mixed Mode: Students studying in mixed mode will participate in a combination of online learning activities in addition to site-specific learning activities, which may include residential schools, co-op placements and/or work-integrated learning as a compulsory requirement of a unit. The additional site-specific learning activities are what differentiates a mixed-mode unit from an online unit.
*All study modes may include Vocational placement and/or work integrated learning.
Select a course structure below to view the delivery details, including the different study modes offered for each structure.
Pre-Apprenticeship Mainstream
This course is delivered over a 20 week period.
- On-campus
| Core | ||||
|---|---|---|---|---|
| AURTTE004 | Inspect and service engines | More Information | Training.gov Details | |
| AURTTD004 | Inspect and service suspension systems | More Information | Training.gov Details | |
| AURTTD002 | Inspect and service steering systems | More Information | Training.gov Details | |
| AURTTC001 | Inspect and service cooling systems | More Information | Training.gov Details | |
| AURTTB001 | Inspect and service braking systems | More Information | Training.gov Details | |
| AURTTA004 | Carry out servicing operations | More Information | Training.gov Details | |
| AURETR015 | Inspect, test and service batteries | More Information | Training.gov Details | |
| AURATA001 | Identify basic automotive faults using troubleshooting processes | More Information | Training.gov Details | |
| AURASA002 | Follow safe working practices in an automotive workplace | More Information | Training.gov Details | |
| AURAEA002 | Follow environmental and sustainability best practice in an automotive workplace | More Information | Training.gov Details | |
| AURTTQ003 | Inspect and service drive shafts | More Information | Training.gov Details | |
| AURTTQ001 | Inspect and service final drive assemblies | More Information | Training.gov Details | |
| AURTTK002 | Use and maintain tools and equipment in an automotive workplace | More Information | Training.gov Details | |
| Elective | ||||
| AURETR003 | Identify automotive electrical systems and components | More Information | Training.gov Details | |
| AURTTX002 | Inspect and service manual transmissions | More Information | Training.gov Details | |
| AURTTF002 | Inspect and service diesel fuel injection systems | More Information | Training.gov Details | |
| AURTTF001 | Inspect and service petrol fuel systems | More Information | Training.gov Details | |
| AURHTJ003 | Remove, inspect and refit heavy vehicle wheel and tyre assemblies | More Information | Training.gov Details | |
| AURETR025 | Test, charge and replace batteries and jump-start vehicles | More Information | Training.gov Details | |
| AURTTJ011 | Balance Wheels and tyres | More Information | Training.gov Details | |
Unit Sequence
Below is the recommended study sequence for this course. Please enrol in your units as per the following order.
Units with the same sequence number should be enrolled into at the same time.
Units with the same sequence number should be enrolled into at the same time.
| Sequence | Unit |
|---|---|
| 1 | AURTTE004 - Inspect and service engines |
| 1 | AURTTQ001 - Inspect and service final drive assemblies |
| 1 | AURETR025 - Test, charge and replace batteries and jump-start vehicles |
| 1 | AURHTJ003 - Remove, inspect and refit heavy vehicle wheel and tyre assemblies |
| 1 | AURTTF001 - Inspect and service petrol fuel systems |
| 1 | AURTTF002 - Inspect and service diesel fuel injection systems |
| 1 | AURTTX002 - Inspect and service manual transmissions |
| 1 | AURTTK002 - Use and maintain tools and equipment in an automotive workplace |
| 1 | AURTTQ003 - Inspect and service drive shafts |
| 1 | AURTTD004 - Inspect and service suspension systems |
| 1 | AURAEA002 - Follow environmental and sustainability best practice in an automotive workplace |
| 1 | AURASA002 - Follow safe working practices in an automotive workplace |
| 1 | AURATA001 - Identify basic automotive faults using troubleshooting processes |
| 1 | AURETR015 - Inspect, test and service batteries |
| 1 | AURTTA004 - Carry out servicing operations |
| 1 | AURTTB001 - Inspect and service braking systems |
| 1 | AURTTC001 - Inspect and service cooling systems |
| 1 | AURTTD002 - Inspect and service steering systems |
| 1 | AURTTJ011 - Balance Wheels and tyres |
The following units have no specific enrolment order and you should discuss the order of enrolment for these with your teacher.
| Unit Code | Unit Name |
|---|---|
| AURETR003 | Identify automotive electrical systems and components |
Course Assessment Information
RPL - Students who have previous informal and formal learning need to advise their trainer/assessor prior to enrolment. If the student wishes to apply for an RPL they need to apply to the RPL Centre.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
| Assessment Types |
|---|
| Written/Electronic Assessment |
| Practical Task |
| RPL |
| Third Party Verification |
Course Learning Outcomes
Where and when can I start?
Please view the more details information for any additional information related to this course.
Domestic 2019 Availabilities
Pre-Apprenticeship Mainstream
On-campus
Rockhampton City
February: Full Time
Mackay
July: Full Time
Domestic 2020 Availabilities
Pre-Apprenticeship Mainstream
On-campus
Rockhampton City
February: Full Time/Part Time
June: Full Time/Part Time
July: Full Time/Part Time
Domestic 2021 Availabilities
Pre-Apprenticeship Mainstream
On-campus
Rockhampton City
February: Part Time
Domestic 2022 Availabilities
Pre-Apprenticeship Mainstream
On-campus
Rockhampton City
February: Full Time/Part Time
March: Full Time/Part Time
International 2019 Availabilities
Pre-Apprenticeship Mainstream
On-campus
Mackay
July: Full Time
International 2020 Availabilities
Pre-Apprenticeship Mainstream
On-campus
Rockhampton City
February: Full Time/Part Time
For individual class days and times for each intake please check the TAFE Timetable located here
The availabilities shown above are for the current and future years. To view any historic availabilities please press "Show Historic Availabilities" below:
Show Historic Availabilities
Show Historic Availabilities
More Details
More Details
Resource Requirements
Students are required to supply their own personal protective equipment as required including appropriate clothing and footwear. Such items include:
- Cotton drill long pants
- Cotton drill short or long sleeved shirt
- Steel capped boots
- Safety glasses