Provides carpentry apprentices with the skills and knowledge to work in the carpentry trade. Competencies include planning and organising work, constructing wall frames, using carpentry tools and equipment, carry out leveling operations and roof framing. Topics covered include occupational health and safety, reading and interpreting plans, measurements and calculations, shaping materials and assembling components with hand and power tools, setting out buildings and footings on-site using a variety of leveling devices such as lasers, constructing timber pitching roof frames, installing sub-floor framing, timber/sheet flooring and door frames. Elective choices may lead to specific occupations within the industry sector.
This course is for apprenticeship training only. Students must be employed as apprentices in a relevant industry.
Course Type | Qualification |
---|---|
Student Availability |
|
Fees | For detailed information on Course Fees, visit www.cqu.edu.au/fees |
Application Mode |
|
How to Apply | Please Enquire |
Study Area |
|
Skill Area |
|
AQF Level | Level 3: Certificate III |
Domestic Students Tertiary Admission Centre Codes (TAC) Codes |
Not Applicable |
---|---|
International Students CRICOS Codes |
Not Applicable |
Occupational outcome of Carpenter.
Study Mode Definitions
*All study modes may include Vocational placement and/or work integrated learning.
Select a course structure below to view the delivery details, including the different study modes offered for each structure.
Apprentices Only
Approximately 950 hours of study time will be involved however, the training duration will depend on the electives chosen for the apprenticeship.
Core | ||||
---|---|---|---|---|
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | More Information | Training.gov Details | |
CPCCCO2013A | Carry out concreting to simple forms | More Information | Training.gov Details | |
CPCCCM2010B | Work safely at heights | More Information | Training.gov Details | |
CPCCCM2008B | Erect and dismantle restricted height scaffolding | More Information | Training.gov Details | |
CPCCCM2007B | Use explosive power tools | More Information | Training.gov Details | |
CPCCCM2002A | Carry out excavation | More Information | Training.gov Details | |
CPCCCM2001A | Read and interpret plans and specifications | More Information | Training.gov Details | |
CPCCCM1015A | Carry out measurements and calculations | More Information | Training.gov Details | |
CPCCCM1014A | Conduct workplace communication | More Information | Training.gov Details | |
CPCCCM1013A | Plan and organise work | More Information | Training.gov Details | |
CPCCCM1012A | Work effectively and sustainably in the construction industry | More Information | Training.gov Details | |
CPCCCA3023A | Carry out levelling operations | More Information | Training.gov Details | |
CPCCCA3008B | Construct eaves | More Information | Training.gov Details | |
CPCCCA3007C | Construct pitched roofs | More Information | Training.gov Details | |
CPCCCA3006B | Erect roof trusses | More Information | Training.gov Details | |
CPCCCA3005B | Construct ceiling frames | More Information | Training.gov Details | |
CPCCCA3004A | Construct wall frames | More Information | Training.gov Details | |
CPCCCA3003A | Install flooring systems | More Information | Training.gov Details | |
CPCCCA3002A | Carry out setting out | More Information | Training.gov Details | |
CPCCCA3001A | Carry out general demolition of minor building structures | More Information | Training.gov Details | |
CPCCCA2002B | Use carpentry tools and equipment | More Information | Training.gov Details | |
CPCCCA2011A | Handle carpentry materials | More Information | Training.gov Details | |
Elective
Eight (8) elective units to be successfully completed.
Please note electives can be amended to suit Employer/Apprentice requirements and are to be chosen according to the Training Package Packaging Rules.
|
||||
CPCCCA3017B | Install exterior cladding | More Information | Training.gov Details | |
MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
CPCCCA3016A | Construct timber external stairs | More Information | Training.gov Details | |
CPCCCA3014A | Construct bulkheads | More Information | Training.gov Details | |
CPCCCA3013A | Install lining, panelling and moulding | More Information | Training.gov Details | |
CPCCCA3012A | Frame and fit wet area fixtures | More Information | Training.gov Details | |
CPCCCA3010A | Install and replace windows and doors | More Information | Training.gov Details | |
CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground | More Information | Training.gov Details |
Unit Code | Unit Name |
---|---|
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCCA3004A | Construct wall frames |
CPCCCA3010A | Install and replace windows and doors |
CPCCCA3012A | Frame and fit wet area fixtures |
CPCCCA3013A | Install lining, panelling and moulding |
CPCCCA3014A | Construct bulkheads |
CPCCCA3016A | Construct timber external stairs |
MEM05050B | Perform routine gas metal arc welding |
CPCCCA3017B | Install exterior cladding |
CPCCCA2011A | Handle carpentry materials |
CPCCCA2002B | Use carpentry tools and equipment |
CPCCCA3001A | Carry out general demolition of minor building structures |
CPCCCA3002A | Carry out setting out |
CPCCCA3003A | Install flooring systems |
CPCCCA3005B | Construct ceiling frames |
CPCCCO2013A | Carry out concreting to simple forms |
CPCCCA3006B | Erect roof trusses |
CPCCCA3007C | Construct pitched roofs |
CPCCCA3008B | Construct eaves |
CPCCCA3023A | Carry out levelling operations |
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCCM2002A | Carry out excavation |
CPCCCM2007B | Use explosive power tools |
CPCCCM2008B | Erect and dismantle restricted height scaffolding |
CPCCCM2010B | Work safely at heights |
CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground |
Core | ||||
---|---|---|---|---|
CPCCCA3008B | Construct eaves | More Information | Training.gov Details | |
CPCCCA3006B | Erect roof trusses | More Information | Training.gov Details | |
CPCCCA3005B | Construct ceiling frames | More Information | Training.gov Details | |
CPCCCA3004A | Construct wall frames | More Information | Training.gov Details | |
CPCCCA3003A | Install flooring systems | More Information | Training.gov Details | |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | More Information | Training.gov Details | |
CPCCCO2013A | Carry out concreting to simple forms | More Information | Training.gov Details | |
CPCCCM2010B | Work safely at heights | More Information | Training.gov Details | |
CPCCCM2008B | Erect and dismantle restricted height scaffolding | More Information | Training.gov Details | |
CPCCCM2007B | Use explosive power tools | More Information | Training.gov Details | |
CPCCCM2002A | Carry out excavation | More Information | Training.gov Details | |
CPCCCM2001A | Read and interpret plans and specifications | More Information | Training.gov Details | |
CPCCCM1014A | Conduct workplace communication | More Information | Training.gov Details | |
CPCCCM1013A | Plan and organise work | More Information | Training.gov Details | |
CPCCCM1012A | Work effectively and sustainably in the construction industry | More Information | Training.gov Details | |
CPCCCA3023A | Carry out levelling operations | More Information | Training.gov Details | |
CPCCCA3002A | Carry out setting out | More Information | Training.gov Details | |
CPCCCA2011A | Handle carpentry materials | More Information | Training.gov Details | |
CPCCCA3001A | Carry out general demolition of minor building structures | More Information | Training.gov Details | |
CPCCCA2002B | Use carpentry tools and equipment | More Information | Training.gov Details | |
CPCCCA3007C | Construct pitched roofs | More Information | Training.gov Details | |
Elective
Eight (8) elective units to be successfully completed.
Please note electives can be amended to suit Employer/Apprentice requirements and are to be chosen according to the Training Package Packaging Rules.
|
||||
CPCCCM1015A | Carry out measurements and calculations | More Information | Training.gov Details | |
CPCCCM3001C | Operate elevated work platforms | More Information | Training.gov Details | |
CPCCCA3017B | Install exterior cladding | More Information | Training.gov Details | |
CPCCCA3019A | Erect and dismantle formwork to suspended slabs, columns, beams and walls | More Information | Training.gov Details | |
CPCCCA3016A | Construct timber external stairs | More Information | Training.gov Details | |
CPCCCA3013A | Install lining, panelling and moulding | More Information | Training.gov Details | |
CPCCCA3012A | Frame and fit wet area fixtures | More Information | Training.gov Details | |
CPCCCA3010A | Install and replace windows and doors | More Information | Training.gov Details | |
CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground | More Information | Training.gov Details |
Unit Code | Unit Name |
---|---|
CPCCCA3008B | Construct eaves |
CPCCCA3002A | Carry out setting out |
CPCCCA3010A | Install and replace windows and doors |
CPCCCA3012A | Frame and fit wet area fixtures |
CPCCCA3013A | Install lining, panelling and moulding |
CPCCCA3016A | Construct timber external stairs |
CPCCCA3019A | Erect and dismantle formwork to suspended slabs, columns, beams and walls |
CPCCCA3017B | Install exterior cladding |
CPCCCM3001C | Operate elevated work platforms |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCA3007C | Construct pitched roofs |
CPCCCA2002B | Use carpentry tools and equipment |
CPCCCA3001A | Carry out general demolition of minor building structures |
CPCCCA2011A | Handle carpentry materials |
CPCCCA3023A | Carry out levelling operations |
CPCCCA3006B | Erect roof trusses |
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCCM2002A | Carry out excavation |
CPCCCM2007B | Use explosive power tools |
CPCCCM2008B | Erect and dismantle restricted height scaffolding |
CPCCCM2010B | Work safely at heights |
CPCCCO2013A | Carry out concreting to simple forms |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCCA3003A | Install flooring systems |
CPCCCA3004A | Construct wall frames |
CPCCCA3005B | Construct ceiling frames |
CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground |
Assessment Types |
---|
Written/Electronic Assessment |
RPL |
Practical Task |
Third Party Verification |
Contact Us
To apply, or to find out more about this course, contact the Student Advice Team on 13 27 86.
Course Requirements
Basic mathematic ability must be developed for successful course completion.