This program provides the skills and knowledge required to work as a engineering tradesperson in a number of disciplines:Mechanical (Maintenance) Diesel Fitting; Mechanical Trade (Machining);Mechanical Trade (Maintenance) Fitting and Turning;Mechanical Trade (Refrigeration and Air Conditioning).
This course is for apprenticeship training only. Students must be employed as apprentices in a relevant industry.
Course Type | Qualification |
---|---|
Student Availability |
|
Fees | For detailed information on Course Fees, visit www.cqu.edu.au/fees |
Application Mode |
|
How to Apply | Please Enquire |
Study Area |
|
Skill Area |
|
AQF Level | Level 3: Certificate III |
Domestic Students Tertiary Admission Centre Codes (TAC) Codes |
Not Applicable |
---|---|
International Students CRICOS Codes |
Not Applicable |
Employment outcomes related to this qualification are found in a wide variety of manufacturing and engineering related sectors as well as Engineering Tradesperson - Mechanical roles in other industries.
Contract with PT Thiess for delivery in Indonesia-Balikpapan. Third Party Services arrangement PT Thiess Contractors Indonesia provides the following services on behalf of CQUniversity for this course: Recruitment of learners through PT Thiess employees Provision of educational or support services Delivery of training and/or assessment PT Thiess employees should make contact by Telephone: +62 21 2754 9999 or Email: miningjobs@thiess.com.au.
Study Mode Definitions
*All study modes may include Vocational placement and/or work integrated learning.
Select a course structure below to view the delivery details, including the different study modes offered for each structure.
This course is for apprentices only.
Core | ||||
---|---|---|---|---|
MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
MEM12024A | Perform computations | More Information | Training.gov Details | |
MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
MEM15002A | Apply quality systems | More Information | Training.gov Details | |
MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
Elective | ||||
MEM18041B | Maintain steering systems | More Information | Training.gov Details | |
MEM18040B | Maintain suspension systems | More Information | Training.gov Details | |
MEM18047B | Diagnose and maintain electronic controlling systems on mobile plant | More Information | Training.gov Details | |
MEM18032B | Maintain induction/exhaust systems | More Information | Training.gov Details | |
MEM18029B | Tune diesel engines | More Information | Training.gov Details | |
MEM18052B | Maintain fluid power systems for mobile plant | More Information | Training.gov Details | |
MEM18043C | Diagnose and rectify automatic transmissions | More Information | Training.gov Details | |
MEM18033B | Perform engine bottom-end overhaul | More Information | Training.gov Details | |
MEM18042C | Diagnose and rectify manual transmissions | More Information | Training.gov Details | |
MEM18044C | Diagnose and rectify drive line and final drives | More Information | Training.gov Details | |
MEM18030B | Diagnose and rectify low voltage electrical systems | More Information | Training.gov Details | |
MEM18035B | Diagnose and rectify braking systems | More Information | Training.gov Details | |
MEM18026C | Test compression ignition fuel systems | More Information | Training.gov Details | |
MEM18024B | Maintain engine cooling systems | More Information | Training.gov Details | |
MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
MEM18001C | Use hand tools | More Information | Training.gov Details |
Unit Code | Unit Name |
---|---|
MSAENV272B | Participate in environmentally sustainable work practices |
MEM17003A | Assist in the provision of on the job training |
MEM16008A | Interact with computing technology |
MEM12024A | Perform computations |
MEM14005A | Plan a complete activity |
MEM12023A | Perform engineering measurements |
MEM16006A | Organise and communicate information |
MEM15002A | Apply quality systems |
MEM14004A | Plan to undertake a routine task |
MEM15024A | Apply quality procedures |
MEM13014A | Apply principles of occupational health and safety in the work environment |
MEM16007A | Work with others in a manufacturing, engineering or related environment |
MEM18041B | Maintain steering systems |
MEM18040B | Maintain suspension systems |
MEM18047B | Diagnose and maintain electronic controlling systems on mobile plant |
MEM18032B | Maintain induction/exhaust systems |
MEM18029B | Tune diesel engines |
MEM18052B | Maintain fluid power systems for mobile plant |
MEM18043C | Diagnose and rectify automatic transmissions |
MEM18033B | Perform engine bottom-end overhaul |
MEM18042C | Diagnose and rectify manual transmissions |
MEM18044C | Diagnose and rectify drive line and final drives |
MEM18030B | Diagnose and rectify low voltage electrical systems |
MEM18035B | Diagnose and rectify braking systems |
MEM18026C | Test compression ignition fuel systems |
MEM18024B | Maintain engine cooling systems |
MEM05050B | Perform routine gas metal arc welding |
MEM05012C | Perform routine manual metal arc welding |
MEM05007C | Perform manual heating and thermal cutting |
MEM09002B | Interpret technical drawing |
MEM18055B | Dismantle, replace and assemble engineering components |
MEM18002B | Use power tools/hand held operations |
MEM18001C | Use hand tools |
Core | ||||
---|---|---|---|---|
MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
MEM12024A | Perform computations | More Information | Training.gov Details | |
MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
MEM15002A | Apply quality systems | More Information | Training.gov Details | |
MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
Elective | ||||
MEM18043C | Diagnose and rectify automatic transmissions | More Information | Training.gov Details | |
MEM18042C | Diagnose and rectify manual transmissions | More Information | Training.gov Details | |
MEM18044C | Diagnose and rectify drive line and final drives | More Information | Training.gov Details | |
MEM18030B | Diagnose and rectify low voltage electrical systems | More Information | Training.gov Details | |
MEM18035B | Diagnose and rectify braking systems | More Information | Training.gov Details | |
MEM18024B | Maintain engine cooling systems | More Information | Training.gov Details | |
MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
MEM18001C | Use hand tools | More Information | Training.gov Details | |
MEM18033B | Perform engine bottom-end overhaul | More Information | Training.gov Details | |
MEM18052B | Maintain fluid power systems for mobile plant | More Information | Training.gov Details |
Unit Code | Unit Name |
---|---|
MSAENV272B | Participate in environmentally sustainable work practices |
MEM16008A | Interact with computing technology |
MEM12024A | Perform computations |
MEM14005A | Plan a complete activity |
MEM12023A | Perform engineering measurements |
MEM16006A | Organise and communicate information |
MEM15002A | Apply quality systems |
MEM14004A | Plan to undertake a routine task |
MEM15024A | Apply quality procedures |
MEM13014A | Apply principles of occupational health and safety in the work environment |
MEM16007A | Work with others in a manufacturing, engineering or related environment |
MEM18043C | Diagnose and rectify automatic transmissions |
MEM18042C | Diagnose and rectify manual transmissions |
MEM18044C | Diagnose and rectify drive line and final drives |
MEM18030B | Diagnose and rectify low voltage electrical systems |
MEM18035B | Diagnose and rectify braking systems |
MEM18024B | Maintain engine cooling systems |
MEM05050B | Perform routine gas metal arc welding |
MEM05012C | Perform routine manual metal arc welding |
MEM05007C | Perform manual heating and thermal cutting |
MEM09002B | Interpret technical drawing |
MEM18055B | Dismantle, replace and assemble engineering components |
MEM18002B | Use power tools/hand held operations |
MEM18001C | Use hand tools |
MEM18033B | Perform engine bottom-end overhaul |
MEM18052B | Maintain fluid power systems for mobile plant |
This course is for apprentices only and is usually completed over four years.
Core | ||||
---|---|---|---|---|
MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
MEM15002A | Apply quality systems | More Information | Training.gov Details | |
MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
MEM12024A | Perform computations | More Information | Training.gov Details | |
MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
Elective | ||||
MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
MEM18021B | Maintain hydraulic systems | More Information | Training.gov Details | |
MEM18020B | Maintain hydraulic system components | More Information | Training.gov Details | |
MEM18019B | Maintain pneumatic systems | More Information | Training.gov Details | |
MEM18018C | Maintain pneumatic system components | More Information | Training.gov Details | |
MEM18013B | Perform gland packing | More Information | Training.gov Details | |
MEM18012B | Perform installation and removal of mechanical seals | More Information | Training.gov Details | |
MEM18009B | Perform levelling and alignment of machines and engineering components | More Information | Training.gov Details | |
MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies | More Information | Training.gov Details | |
MEM18006C | Repair & fit engineering components | More Information | Training.gov Details | |
MEM18005B | Perform fault diagnosis, installation & removal of bearings | More Information | Training.gov Details | |
MEM18004B | Maintain and overhaul mechanical equipment | More Information | Training.gov Details | |
MEM18003C | Use tools for precision work | More Information | Training.gov Details | |
MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
MEM18001C | Use hand tools | More Information | Training.gov Details | |
MEM12006C | Mark off/out (general engineering) | More Information | Training.gov Details | |
MEM12003B | Perform precision mechanical measurement | More Information | Training.gov Details | |
MEM11011B | Undertake manual handling | More Information | Training.gov Details | |
MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
MEM07007C | Perform milling operations | More Information | Training.gov Details | |
MEM07006C | Perform lathe operations | More Information | Training.gov Details | |
MEM07005C | Perform general machining | More Information | Training.gov Details |
Unit Code | Unit Name |
---|---|
MSAENV272B | Participate in environmentally sustainable work practices |
MEM17003A | Assist in the provision of on the job training |
MEM16008A | Interact with computing technology |
MEM16007A | Work with others in a manufacturing, engineering or related environment |
MEM16006A | Organise and communicate information |
MEM15024A | Apply quality procedures |
MEM15002A | Apply quality systems |
MEM14005A | Plan a complete activity |
MEM14004A | Plan to undertake a routine task |
MEM13014A | Apply principles of occupational health and safety in the work environment |
MEM12024A | Perform computations |
MEM12023A | Perform engineering measurements |
MEM05050B | Perform routine gas metal arc welding |
MEM05012C | Perform routine manual metal arc welding |
MEM05007C | Perform manual heating and thermal cutting |
MEM18055B | Dismantle, replace and assemble engineering components |
MEM18021B | Maintain hydraulic systems |
MEM18020B | Maintain hydraulic system components |
MEM18019B | Maintain pneumatic systems |
MEM18018C | Maintain pneumatic system components |
MEM18013B | Perform gland packing |
MEM18012B | Perform installation and removal of mechanical seals |
MEM18009B | Perform levelling and alignment of machines and engineering components |
MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies |
MEM18006C | Repair & fit engineering components |
MEM18005B | Perform fault diagnosis, installation & removal of bearings |
MEM18004B | Maintain and overhaul mechanical equipment |
MEM18003C | Use tools for precision work |
MEM18002B | Use power tools/hand held operations |
MEM18001C | Use hand tools |
MEM12006C | Mark off/out (general engineering) |
MEM12003B | Perform precision mechanical measurement |
MEM11011B | Undertake manual handling |
MEM09002B | Interpret technical drawing |
MEM07007C | Perform milling operations |
MEM07006C | Perform lathe operations |
MEM07005C | Perform general machining |
Core | ||||
---|---|---|---|---|
MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
MEM15002A | Apply quality systems | More Information | Training.gov Details | |
MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
MEM12024A | Perform computations | More Information | Training.gov Details | |
MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
Elective | ||||
MEM18011C | Shut down and isolate machines/equipment | More Information | Training.gov Details | |
MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
MEM18021B | Maintain hydraulic systems | More Information | Training.gov Details | |
MEM18020B | Maintain hydraulic system components | More Information | Training.gov Details | |
MEM18019B | Maintain pneumatic systems | More Information | Training.gov Details | |
MEM18018C | Maintain pneumatic system components | More Information | Training.gov Details | |
MEM18013B | Perform gland packing | More Information | Training.gov Details | |
MEM18012B | Perform installation and removal of mechanical seals | More Information | Training.gov Details | |
MEM18009B | Perform levelling and alignment of machines and engineering components | More Information | Training.gov Details | |
MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies | More Information | Training.gov Details | |
MEM18006C | Repair & fit engineering components | More Information | Training.gov Details | |
MEM18005B | Perform fault diagnosis, installation & removal of bearings | More Information | Training.gov Details | |
MEM18004B | Maintain and overhaul mechanical equipment | More Information | Training.gov Details | |
MEM18003C | Use tools for precision work | More Information | Training.gov Details | |
MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
MEM18001C | Use hand tools | More Information | Training.gov Details | |
MEM12006C | Mark off/out (general engineering) | More Information | Training.gov Details | |
MEM12003B | Perform precision mechanical measurement | More Information | Training.gov Details | |
MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
MEM07028B | Operate computer controlled machines/processes | More Information | Training.gov Details | |
MEM07024B | Operate and monitor machine/process | More Information | Training.gov Details | |
MEM07021B | Perform complex lathe operations | More Information | Training.gov Details | |
MEM07018C | Write basic NC/CNC programs | More Information | Training.gov Details | |
MEM07016C | Set and edit computer controlled machines/processes | More Information | Training.gov Details | |
MEM07015B | Set computer controlled machines/processes | More Information | Training.gov Details | |
MEM07013B | Perform machining operations using horizontal and/or vertical boring machine | More Information | Training.gov Details | |
MEM07007C | Perform milling operations | More Information | Training.gov Details | |
MEM07006C | Perform lathe operations | More Information | Training.gov Details | |
MEM07005C | Perform general machining | More Information | Training.gov Details | |
MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details |
Unit Code | Unit Name |
---|---|
MSAENV272B | Participate in environmentally sustainable work practices |
MEM17003A | Assist in the provision of on the job training |
MEM16008A | Interact with computing technology |
MEM16007A | Work with others in a manufacturing, engineering or related environment |
MEM16006A | Organise and communicate information |
MEM15024A | Apply quality procedures |
MEM15002A | Apply quality systems |
MEM14005A | Plan a complete activity |
MEM14004A | Plan to undertake a routine task |
MEM13014A | Apply principles of occupational health and safety in the work environment |
MEM12024A | Perform computations |
MEM12023A | Perform engineering measurements |
MEM18011C | Shut down and isolate machines/equipment |
MEM18055B | Dismantle, replace and assemble engineering components |
MEM18021B | Maintain hydraulic systems |
MEM18020B | Maintain hydraulic system components |
MEM18019B | Maintain pneumatic systems |
MEM18018C | Maintain pneumatic system components |
MEM18013B | Perform gland packing |
MEM18012B | Perform installation and removal of mechanical seals |
MEM18009B | Perform levelling and alignment of machines and engineering components |
MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies |
MEM18006C | Repair & fit engineering components |
MEM18005B | Perform fault diagnosis, installation & removal of bearings |
MEM18004B | Maintain and overhaul mechanical equipment |
MEM18003C | Use tools for precision work |
MEM18002B | Use power tools/hand held operations |
MEM18001C | Use hand tools |
MEM12006C | Mark off/out (general engineering) |
MEM12003B | Perform precision mechanical measurement |
MEM09002B | Interpret technical drawing |
MEM07028B | Operate computer controlled machines/processes |
MEM07024B | Operate and monitor machine/process |
MEM07021B | Perform complex lathe operations |
MEM07018C | Write basic NC/CNC programs |
MEM07016C | Set and edit computer controlled machines/processes |
MEM07015B | Set computer controlled machines/processes |
MEM07013B | Perform machining operations using horizontal and/or vertical boring machine |
MEM07007C | Perform milling operations |
MEM07006C | Perform lathe operations |
MEM07005C | Perform general machining |
MEM05050B | Perform routine gas metal arc welding |
MEM05012C | Perform routine manual metal arc welding |
MEM05007C | Perform manual heating and thermal cutting |
Core | ||||
---|---|---|---|---|
MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
MEM15002A | Apply quality systems | More Information | Training.gov Details | |
MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
MEM12024A | Perform computations | More Information | Training.gov Details | |
MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
Elective | ||||
MEM12001B | Use comparison and basic measuring devices | More Information | Training.gov Details | |
MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
MEM18020B | Maintain hydraulic system components | More Information | Training.gov Details | |
MEM18018C | Maintain pneumatic system components | More Information | Training.gov Details | |
MEM18009B | Perform levelling and alignment of machines and engineering components | More Information | Training.gov Details | |
MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies | More Information | Training.gov Details | |
MEM18006C | Repair & fit engineering components | More Information | Training.gov Details | |
MEM18005B | Perform fault diagnosis, installation & removal of bearings | More Information | Training.gov Details | |
MEM18004B | Maintain and overhaul mechanical equipment | More Information | Training.gov Details | |
MEM18003C | Use tools for precision work | More Information | Training.gov Details | |
MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
MEM18001C | Use hand tools | More Information | Training.gov Details | |
MEM12006C | Mark off/out (general engineering) | More Information | Training.gov Details | |
MEM12003B | Perform precision mechanical measurement | More Information | Training.gov Details | |
MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
MEM07028B | Operate computer controlled machines/processes | More Information | Training.gov Details | |
MEM07024B | Operate and monitor machine/process | More Information | Training.gov Details | |
MEM07018C | Write basic NC/CNC programs | More Information | Training.gov Details | |
MEM07016C | Set and edit computer controlled machines/processes | More Information | Training.gov Details | |
MEM07015B | Set computer controlled machines/processes | More Information | Training.gov Details | |
MEM07007C | Perform milling operations | More Information | Training.gov Details | |
MEM07006C | Perform lathe operations | More Information | Training.gov Details | |
MEM07005C | Perform general machining | More Information | Training.gov Details |
Unit Code | Unit Name |
---|---|
MSAENV272B | Participate in environmentally sustainable work practices |
MEM17003A | Assist in the provision of on the job training |
MEM16008A | Interact with computing technology |
MEM16007A | Work with others in a manufacturing, engineering or related environment |
MEM16006A | Organise and communicate information |
MEM15024A | Apply quality procedures |
MEM15002A | Apply quality systems |
MEM14005A | Plan a complete activity |
MEM14004A | Plan to undertake a routine task |
MEM13014A | Apply principles of occupational health and safety in the work environment |
MEM12024A | Perform computations |
MEM12023A | Perform engineering measurements |
MEM12001B | Use comparison and basic measuring devices |
MEM05012C | Perform routine manual metal arc welding |
MEM05007C | Perform manual heating and thermal cutting |
MEM18055B | Dismantle, replace and assemble engineering components |
MEM18020B | Maintain hydraulic system components |
MEM18018C | Maintain pneumatic system components |
MEM18009B | Perform levelling and alignment of machines and engineering components |
MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies |
MEM18006C | Repair & fit engineering components |
MEM18005B | Perform fault diagnosis, installation & removal of bearings |
MEM18004B | Maintain and overhaul mechanical equipment |
MEM18003C | Use tools for precision work |
MEM18002B | Use power tools/hand held operations |
MEM18001C | Use hand tools |
MEM12006C | Mark off/out (general engineering) |
MEM12003B | Perform precision mechanical measurement |
MEM09002B | Interpret technical drawing |
MEM07028B | Operate computer controlled machines/processes |
MEM07024B | Operate and monitor machine/process |
MEM07018C | Write basic NC/CNC programs |
MEM07016C | Set and edit computer controlled machines/processes |
MEM07015B | Set computer controlled machines/processes |
MEM07007C | Perform milling operations |
MEM07006C | Perform lathe operations |
MEM07005C | Perform general machining |
This course is for apprentices only.
Core | ||||
---|---|---|---|---|
MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
MEM12024A | Perform computations | More Information | Training.gov Details | |
MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
MEM15002A | Apply quality systems | More Information | Training.gov Details | |
MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
Elective | ||||
MEM18047B | Diagnose and maintain electronic controlling systems on mobile plant | More Information | Training.gov Details | |
MEM18044C | Diagnose and rectify drive line and final drives | More Information | Training.gov Details | |
MEM18037B | Diagnose and rectify low voltage charging systems | More Information | Training.gov Details | |
MEM18032B | Maintain induction/exhaust systems | More Information | Training.gov Details | |
MEM18031B | Diagnose and rectify low voltage starting systems | More Information | Training.gov Details | |
MEM18030B | Diagnose and rectify low voltage electrical systems | More Information | Training.gov Details | |
MEM18029B | Tune diesel engines | More Information | Training.gov Details | |
MEM18026C | Test compression ignition fuel systems | More Information | Training.gov Details | |
MEM18025B | Service combustion engines | More Information | Training.gov Details | |
MEM18024B | Maintain engine cooling systems | More Information | Training.gov Details | |
MEM18020B | Maintain hydraulic system components | More Information | Training.gov Details | |
MEM18013B | Perform gland packing | More Information | Training.gov Details | |
MEM18009B | Perform levelling and alignment of machines and engineering components | More Information | Training.gov Details | |
MEM18006C | Repair & fit engineering components | More Information | Training.gov Details | |
MEM18003C | Use tools for precision work | More Information | Training.gov Details | |
MEM11011B | Undertake manual handling | More Information | Training.gov Details | |
MEM11010B | Operate mobile load shifting equipment | More Information | Training.gov Details | |
MEM07005C | Perform general machining | More Information | Training.gov Details | |
MEM05005B | Carry out mechanical cutting | More Information | Training.gov Details | |
MEM05004C | Perform routine oxy acetylene welding | More Information | Training.gov Details | |
MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
MEM18001C | Use hand tools | More Information | Training.gov Details |
Unit Code | Unit Name |
---|---|
MSAENV272B | Participate in environmentally sustainable work practices |
MEM17003A | Assist in the provision of on the job training |
MEM16008A | Interact with computing technology |
MEM12024A | Perform computations |
MEM14005A | Plan a complete activity |
MEM12023A | Perform engineering measurements |
MEM16006A | Organise and communicate information |
MEM15002A | Apply quality systems |
MEM14004A | Plan to undertake a routine task |
MEM15024A | Apply quality procedures |
MEM13014A | Apply principles of occupational health and safety in the work environment |
MEM16007A | Work with others in a manufacturing, engineering or related environment |
MEM18047B | Diagnose and maintain electronic controlling systems on mobile plant |
MEM18044C | Diagnose and rectify drive line and final drives |
MEM18037B | Diagnose and rectify low voltage charging systems |
MEM18032B | Maintain induction/exhaust systems |
MEM18031B | Diagnose and rectify low voltage starting systems |
MEM18030B | Diagnose and rectify low voltage electrical systems |
MEM18029B | Tune diesel engines |
MEM18026C | Test compression ignition fuel systems |
MEM18025B | Service combustion engines |
MEM18024B | Maintain engine cooling systems |
MEM18020B | Maintain hydraulic system components |
MEM18013B | Perform gland packing |
MEM18009B | Perform levelling and alignment of machines and engineering components |
MEM18006C | Repair & fit engineering components |
MEM18003C | Use tools for precision work |
MEM11011B | Undertake manual handling |
MEM11010B | Operate mobile load shifting equipment |
MEM07005C | Perform general machining |
MEM05005B | Carry out mechanical cutting |
MEM05004C | Perform routine oxy acetylene welding |
MEM05050B | Perform routine gas metal arc welding |
MEM05012C | Perform routine manual metal arc welding |
MEM05007C | Perform manual heating and thermal cutting |
MEM09002B | Interpret technical drawing |
MEM18055B | Dismantle, replace and assemble engineering components |
MEM18001C | Use hand tools |
Assessment Types |
---|
Third Party Verification |
Written/Electronic Assessment |
Practical Task |
RPL |
Third Party Services arrangement
PT Thiess Contractors Indonesia provides the following services on behalf of CQUniversity for this course:
PT Thiess employees should make contact by Telephone: +62 21 2754 9999 or Email: miningjobs@thiess.com.au.