-
CQUni Phonebook CQUni Phonebook
-
User Quick links Profile
CQUni Handbook
Previous Version
Version Effective: 12th of July, 2022
MEM30205 - Certificate III in Engineering - Mechanical Trade
Course Details
Course Summary
This program provides the skills and knowledge required to work as a engineering tradesperson in a number of disciplines: Mechanical (Maintenance) Diesel Fitting; Mechanical Trade (Machining); Mechanical Trade (Maintenance) Fitting and Turning; Mechanical Trade (Refrigeration and Air Conditioning).
Aurizon Post trade employees to gain specific skills, knowledge and experience in the Diesel Fitting pathway.
Entry Requirements
Completion of the bksb (Basic Key Skills Builder) online literacy and numeracy assessment prior to enrolment, unless the student has completed an equal or higher-level course.
This course is for apprenticeship training only. Students must be employed as apprentices in a relevant industry.
Course Details
| Course Type | Qualification |
|---|---|
| Student Availability |
|
| Fees | For detailed information on Course Fees, visit www.cqu.edu.au/fees |
| Application Mode |
|
| How to Apply | Please Enquire |
| Study Area |
|
| Skill Area |
|
| AQF Level | Level 3: Certificate III |
Admission Codes
|
Domestic Students Tertiary Admission Centre Codes (TAC) Codes |
Not Applicable |
|---|---|
|
International Students CRICOS Codes |
Not Applicable |
Student Outcomes, Career Opportunities and Occupations
Employment outcomes related to this qualification are found in a wide variety of manufacturing and engineering related sectors as well as Engineering Tradesperson - Mechanical roles in other industries.
Delivery Agreement
Contract with PT Thiess for delivery in Indonesia-Balikpapan. Third Party Services arrangement PT Thiess Contractors Indonesia provides the following services on behalf of CQUniversity for this course: Recruitment of learners through PT Thiess employees Provision of educational or support services Delivery of training and/or assessment PT Thiess employees should make contact by Telephone: +62 21 2754 9999 or Email: miningjobs@thiess.com.au.
BHP Operations Services (OS) are recruiting apprentices under this course and will be training under CQUni's scope of registration for their National Training Program in Queensland. CQUni VET Educators will be conducting the assessments for this course.
The Aurizon Update will not be delivered under a Co-Provider.
Course Structures
In order to complete this course, you must:
- Complete 12 core units
- Complete 18 elective units
Study Mode Definitions
- Online: Online courses provide the flexibility to study without normally requiring a student to visit a campus. Course content is studied through a number of means including the use of online discussion forums, electronic library resources, by contacting lecturers and teachers, and receiving study materials online/electronically. Work integrated learning, including placements, may be included in some courses.
- On-campus: Students studying in on-campus mode typically are expected to attend and participate in regular, structured on-campus teaching and learning activities throughout the University’s academic term. These activities may include lectures, tutorials, workshops and practice, online or other activities and normally will be timetabled at a CQUniversity campus or approved delivery site.
- Mixed Mode: Students studying in mixed mode will participate in a combination of online learning activities in addition to site-specific learning activities, which may include residential schools, co-op placements and/or work-integrated learning as a compulsory requirement of a unit. The additional site-specific learning activities are what differentiates a mixed-mode unit from an online unit.
*All study modes may include Vocational placement and/or work integrated learning.
Select a course structure below to view the delivery details, including the different study modes offered for each structure.
Please select a course structure from the options below:
Diesel Fitting/Mechanical - Rockhampton
This course is for apprentices only and is usually completed over four years.
- RPL/RCC/Credit
- On-campus
| Core | ||||
|---|---|---|---|---|
| MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
| MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
| MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
| MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
| MEM15002A | Apply quality systems | More Information | Training.gov Details | |
| MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
| MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
| MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
| MEM12024A | Perform computations | More Information | Training.gov Details | |
| MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
| MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
| MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
| Elective | ||||
| MEM18003C | Use tools for precision work | More Information | Training.gov Details | |
| MEM18006C | Repair & fit engineering components | More Information | Training.gov Details | |
| MEM18018C | Maintain pneumatic system components | More Information | Training.gov Details | |
| MEM18001C | Use hand tools | More Information | Training.gov Details | |
| MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
| MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
| MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
| MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
| MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
| MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
| MEM18024B | Maintain engine cooling systems | More Information | Training.gov Details | |
| MEM18026C | Test compression ignition fuel systems | More Information | Training.gov Details | |
| MEM18035B | Diagnose and rectify braking systems | More Information | Training.gov Details | |
| MEM18030B | Diagnose and rectify low voltage electrical systems | More Information | Training.gov Details | |
| MEM18044C | Diagnose and rectify drive line and final drives | More Information | Training.gov Details | |
| MEM18042C | Diagnose and rectify manual transmissions | More Information | Training.gov Details | |
| MEM18033B | Perform engine bottom-end overhaul | More Information | Training.gov Details | |
| MEM18043C | Diagnose and rectify automatic transmissions | More Information | Training.gov Details | |
| MEM18052B | Maintain fluid power systems for mobile plant | More Information | Training.gov Details | |
| MEM18029B | Tune diesel engines | More Information | Training.gov Details | |
| MEM18032B | Maintain induction/exhaust systems | More Information | Training.gov Details | |
| MEM18047B | Diagnose and maintain electronic controlling systems on mobile plant | More Information | Training.gov Details | |
| MEM18040B | Maintain suspension systems | More Information | Training.gov Details | |
| MEM18041B | Maintain steering systems | More Information | Training.gov Details | |
| MEM18021B | Maintain hydraulic systems | More Information | Training.gov Details | |
| MEM18020B | Maintain hydraulic system components | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| MEM16007A | Work with others in a manufacturing, engineering or related environment |
| MEM13014A | Apply principles of occupational health and safety in the work environment |
| MEM15024A | Apply quality procedures |
| MEM14004A | Plan to undertake a routine task |
| MEM15002A | Apply quality systems |
| MEM16006A | Organise and communicate information |
| MEM12023A | Perform engineering measurements |
| MEM14005A | Plan a complete activity |
| MEM12024A | Perform computations |
| MEM16008A | Interact with computing technology |
| MEM17003A | Assist in the provision of on the job training |
| MSAENV272B | Participate in environmentally sustainable work practices |
| MEM18003C | Use tools for precision work |
| MEM18006C | Repair & fit engineering components |
| MEM18018C | Maintain pneumatic system components |
| MEM18001C | Use hand tools |
| MEM18002B | Use power tools/hand held operations |
| MEM18055B | Dismantle, replace and assemble engineering components |
| MEM09002B | Interpret technical drawing |
| MEM05007C | Perform manual heating and thermal cutting |
| MEM05012C | Perform routine manual metal arc welding |
| MEM05050B | Perform routine gas metal arc welding |
| MEM18024B | Maintain engine cooling systems |
| MEM18026C | Test compression ignition fuel systems |
| MEM18035B | Diagnose and rectify braking systems |
| MEM18030B | Diagnose and rectify low voltage electrical systems |
| MEM18044C | Diagnose and rectify drive line and final drives |
| MEM18042C | Diagnose and rectify manual transmissions |
| MEM18033B | Perform engine bottom-end overhaul |
| MEM18043C | Diagnose and rectify automatic transmissions |
| MEM18052B | Maintain fluid power systems for mobile plant |
| MEM18029B | Tune diesel engines |
| MEM18032B | Maintain induction/exhaust systems |
| MEM18047B | Diagnose and maintain electronic controlling systems on mobile plant |
| MEM18040B | Maintain suspension systems |
| MEM18041B | Maintain steering systems |
| MEM18021B | Maintain hydraulic systems |
| MEM18020B | Maintain hydraulic system components |
Diesel Fitting/Mechanical - Mackay
This course is for apprentices only and is usually completed over four years.
- RPL/RCC/Credit
- On-campus
| Core | ||||
|---|---|---|---|---|
| MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
| MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
| MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
| MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
| MEM15002A | Apply quality systems | More Information | Training.gov Details | |
| MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
| MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
| MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
| MEM12024A | Perform computations | More Information | Training.gov Details | |
| MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
| MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
| Elective | ||||
| MEM18052B | Maintain fluid power systems for mobile plant | More Information | Training.gov Details | |
| MEM18033B | Perform engine bottom-end overhaul | More Information | Training.gov Details | |
| MEM18001C | Use hand tools | More Information | Training.gov Details | |
| MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
| MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
| MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
| MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
| MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
| MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
| MEM18024B | Maintain engine cooling systems | More Information | Training.gov Details | |
| MEM18035B | Diagnose and rectify braking systems | More Information | Training.gov Details | |
| MEM18030B | Diagnose and rectify low voltage electrical systems | More Information | Training.gov Details | |
| MEM18044C | Diagnose and rectify drive line and final drives | More Information | Training.gov Details | |
| MEM18042C | Diagnose and rectify manual transmissions | More Information | Training.gov Details | |
| MEM18043C | Diagnose and rectify automatic transmissions | More Information | Training.gov Details | |
| MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
| MEM18041B | Maintain steering systems | More Information | Training.gov Details | |
| MEM18040B | Maintain suspension systems | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| MEM16007A | Work with others in a manufacturing, engineering or related environment |
| MEM13014A | Apply principles of occupational health and safety in the work environment |
| MEM15024A | Apply quality procedures |
| MEM14004A | Plan to undertake a routine task |
| MEM15002A | Apply quality systems |
| MEM16006A | Organise and communicate information |
| MEM12023A | Perform engineering measurements |
| MEM14005A | Plan a complete activity |
| MEM12024A | Perform computations |
| MEM16008A | Interact with computing technology |
| MSAENV272B | Participate in environmentally sustainable work practices |
| MEM18052B | Maintain fluid power systems for mobile plant |
| MEM18033B | Perform engine bottom-end overhaul |
| MEM18001C | Use hand tools |
| MEM18002B | Use power tools/hand held operations |
| MEM18055B | Dismantle, replace and assemble engineering components |
| MEM09002B | Interpret technical drawing |
| MEM05007C | Perform manual heating and thermal cutting |
| MEM05012C | Perform routine manual metal arc welding |
| MEM05050B | Perform routine gas metal arc welding |
| MEM18024B | Maintain engine cooling systems |
| MEM18035B | Diagnose and rectify braking systems |
| MEM18030B | Diagnose and rectify low voltage electrical systems |
| MEM18044C | Diagnose and rectify drive line and final drives |
| MEM18042C | Diagnose and rectify manual transmissions |
| MEM18043C | Diagnose and rectify automatic transmissions |
| MEM17003A | Assist in the provision of on the job training |
| MEM18041B | Maintain steering systems |
| MEM18040B | Maintain suspension systems |
Fitting and Turning - Gladstone
This course is for apprentices only and is usually completed over four years.
- RPL/RCC/Credit
- On-campus
| Core | ||||
|---|---|---|---|---|
| MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
| MEM12024A | Perform computations | More Information | Training.gov Details | |
| MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
| MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
| MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
| MEM15002A | Apply quality systems | More Information | Training.gov Details | |
| MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
| MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
| MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
| MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
| MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
| MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
| Elective | ||||
| MEM05005B | Carry out mechanical cutting | More Information | Training.gov Details | |
| MEM05049B | Perform routine gas tungsten arc welding | More Information | Training.gov Details | |
| MEM07005C | Perform general machining | More Information | Training.gov Details | |
| MEM07006C | Perform lathe operations | More Information | Training.gov Details | |
| MEM07007C | Perform milling operations | More Information | Training.gov Details | |
| MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
| MEM11011B | Undertake manual handling | More Information | Training.gov Details | |
| MEM12003B | Perform precision mechanical measurement | More Information | Training.gov Details | |
| MEM12006C | Mark off/out (general engineering) | More Information | Training.gov Details | |
| MEM18001C | Use hand tools | More Information | Training.gov Details | |
| MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
| MEM18003C | Use tools for precision work | More Information | Training.gov Details | |
| MEM18004B | Maintain and overhaul mechanical equipment | More Information | Training.gov Details | |
| MEM18005B | Perform fault diagnosis, installation & removal of bearings | More Information | Training.gov Details | |
| MEM18006C | Repair & fit engineering components | More Information | Training.gov Details | |
| MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies | More Information | Training.gov Details | |
| MEM18009B | Perform levelling and alignment of machines and engineering components | More Information | Training.gov Details | |
| MEM18012B | Perform installation and removal of mechanical seals | More Information | Training.gov Details | |
| MEM18013B | Perform gland packing | More Information | Training.gov Details | |
| MEM18018C | Maintain pneumatic system components | More Information | Training.gov Details | |
| MEM18019B | Maintain pneumatic systems | More Information | Training.gov Details | |
| MEM18020B | Maintain hydraulic system components | More Information | Training.gov Details | |
| MEM18021B | Maintain hydraulic systems | More Information | Training.gov Details | |
| MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
| MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
| MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
| MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| MEM12023A | Perform engineering measurements |
| MEM12024A | Perform computations |
| MEM13014A | Apply principles of occupational health and safety in the work environment |
| MEM14004A | Plan to undertake a routine task |
| MEM14005A | Plan a complete activity |
| MEM15002A | Apply quality systems |
| MEM15024A | Apply quality procedures |
| MEM16006A | Organise and communicate information |
| MEM16007A | Work with others in a manufacturing, engineering or related environment |
| MEM16008A | Interact with computing technology |
| MEM17003A | Assist in the provision of on the job training |
| MSAENV272B | Participate in environmentally sustainable work practices |
| MEM05005B | Carry out mechanical cutting |
| MEM05049B | Perform routine gas tungsten arc welding |
| MEM07005C | Perform general machining |
| MEM07006C | Perform lathe operations |
| MEM07007C | Perform milling operations |
| MEM09002B | Interpret technical drawing |
| MEM11011B | Undertake manual handling |
| MEM12003B | Perform precision mechanical measurement |
| MEM12006C | Mark off/out (general engineering) |
| MEM18001C | Use hand tools |
| MEM18002B | Use power tools/hand held operations |
| MEM18003C | Use tools for precision work |
| MEM18004B | Maintain and overhaul mechanical equipment |
| MEM18005B | Perform fault diagnosis, installation & removal of bearings |
| MEM18006C | Repair & fit engineering components |
| MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies |
| MEM18009B | Perform levelling and alignment of machines and engineering components |
| MEM18012B | Perform installation and removal of mechanical seals |
| MEM18013B | Perform gland packing |
| MEM18018C | Maintain pneumatic system components |
| MEM18019B | Maintain pneumatic systems |
| MEM18020B | Maintain hydraulic system components |
| MEM18021B | Maintain hydraulic systems |
| MEM18055B | Dismantle, replace and assemble engineering components |
| MEM05007C | Perform manual heating and thermal cutting |
| MEM05012C | Perform routine manual metal arc welding |
| MEM05050B | Perform routine gas metal arc welding |
Fitting and Turning - Mackay
This course is for apprentices only and is usually completed over four years.
- RPL/RCC/Credit
- On-campus
| Core | ||||
|---|---|---|---|---|
| MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
| MEM12024A | Perform computations | More Information | Training.gov Details | |
| MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
| MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
| MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
| MEM15002A | Apply quality systems | More Information | Training.gov Details | |
| MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
| MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
| MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
| MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
| MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
| MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
| Elective | ||||
| MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
| MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
| MEM05050B | Perform routine gas metal arc welding | More Information | Training.gov Details | |
| MEM07005C | Perform general machining | More Information | Training.gov Details | |
| MEM07006C | Perform lathe operations | More Information | Training.gov Details | |
| MEM07007C | Perform milling operations | More Information | Training.gov Details | |
| MEM07013B | Perform machining operations using horizontal and/or vertical boring machine | More Information | Training.gov Details | |
| MEM07015B | Set computer controlled machines/processes | More Information | Training.gov Details | |
| MEM07016C | Set and edit computer controlled machines/processes | More Information | Training.gov Details | |
| MEM07018C | Write basic NC/CNC programs | More Information | Training.gov Details | |
| MEM07021B | Perform complex lathe operations | More Information | Training.gov Details | |
| MEM07024B | Operate and monitor machine/process | More Information | Training.gov Details | |
| MEM07028B | Operate computer controlled machines/processes | More Information | Training.gov Details | |
| MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
| MEM12003B | Perform precision mechanical measurement | More Information | Training.gov Details | |
| MEM12006C | Mark off/out (general engineering) | More Information | Training.gov Details | |
| MEM18001C | Use hand tools | More Information | Training.gov Details | |
| MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
| MEM18003C | Use tools for precision work | More Information | Training.gov Details | |
| MEM18004B | Maintain and overhaul mechanical equipment | More Information | Training.gov Details | |
| MEM18005B | Perform fault diagnosis, installation & removal of bearings | More Information | Training.gov Details | |
| MEM18006C | Repair & fit engineering components | More Information | Training.gov Details | |
| MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies | More Information | Training.gov Details | |
| MEM18009B | Perform levelling and alignment of machines and engineering components | More Information | Training.gov Details | |
| MEM18012B | Perform installation and removal of mechanical seals | More Information | Training.gov Details | |
| MEM18013B | Perform gland packing | More Information | Training.gov Details | |
| MEM18018C | Maintain pneumatic system components | More Information | Training.gov Details | |
| MEM18019B | Maintain pneumatic systems | More Information | Training.gov Details | |
| MEM18020B | Maintain hydraulic system components | More Information | Training.gov Details | |
| MEM18021B | Maintain hydraulic systems | More Information | Training.gov Details | |
| MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
| MEM18011C | Shut down and isolate machines/equipment | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| MEM12023A | Perform engineering measurements |
| MEM12024A | Perform computations |
| MEM13014A | Apply principles of occupational health and safety in the work environment |
| MEM14004A | Plan to undertake a routine task |
| MEM14005A | Plan a complete activity |
| MEM15002A | Apply quality systems |
| MEM15024A | Apply quality procedures |
| MEM16006A | Organise and communicate information |
| MEM16007A | Work with others in a manufacturing, engineering or related environment |
| MEM16008A | Interact with computing technology |
| MEM17003A | Assist in the provision of on the job training |
| MSAENV272B | Participate in environmentally sustainable work practices |
| MEM05007C | Perform manual heating and thermal cutting |
| MEM05012C | Perform routine manual metal arc welding |
| MEM05050B | Perform routine gas metal arc welding |
| MEM07005C | Perform general machining |
| MEM07006C | Perform lathe operations |
| MEM07007C | Perform milling operations |
| MEM07013B | Perform machining operations using horizontal and/or vertical boring machine |
| MEM07015B | Set computer controlled machines/processes |
| MEM07016C | Set and edit computer controlled machines/processes |
| MEM07018C | Write basic NC/CNC programs |
| MEM07021B | Perform complex lathe operations |
| MEM07024B | Operate and monitor machine/process |
| MEM07028B | Operate computer controlled machines/processes |
| MEM09002B | Interpret technical drawing |
| MEM12003B | Perform precision mechanical measurement |
| MEM12006C | Mark off/out (general engineering) |
| MEM18001C | Use hand tools |
| MEM18002B | Use power tools/hand held operations |
| MEM18003C | Use tools for precision work |
| MEM18004B | Maintain and overhaul mechanical equipment |
| MEM18005B | Perform fault diagnosis, installation & removal of bearings |
| MEM18006C | Repair & fit engineering components |
| MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies |
| MEM18009B | Perform levelling and alignment of machines and engineering components |
| MEM18012B | Perform installation and removal of mechanical seals |
| MEM18013B | Perform gland packing |
| MEM18018C | Maintain pneumatic system components |
| MEM18019B | Maintain pneumatic systems |
| MEM18020B | Maintain hydraulic system components |
| MEM18021B | Maintain hydraulic systems |
| MEM18055B | Dismantle, replace and assemble engineering components |
| MEM18011C | Shut down and isolate machines/equipment |
Fitting and Turning - Rockhampton
This course is for apprentices only and is usually completed over four years.
- RPL/RCC/Credit
- On-campus
| Core | ||||
|---|---|---|---|---|
| MEM12023A | Perform engineering measurements | More Information | Training.gov Details | |
| MEM12024A | Perform computations | More Information | Training.gov Details | |
| MEM13014A | Apply principles of occupational health and safety in the work environment | More Information | Training.gov Details | |
| MEM14004A | Plan to undertake a routine task | More Information | Training.gov Details | |
| MEM14005A | Plan a complete activity | More Information | Training.gov Details | |
| MEM15002A | Apply quality systems | More Information | Training.gov Details | |
| MEM15024A | Apply quality procedures | More Information | Training.gov Details | |
| MEM16006A | Organise and communicate information | More Information | Training.gov Details | |
| MEM16007A | Work with others in a manufacturing, engineering or related environment | More Information | Training.gov Details | |
| MEM16008A | Interact with computing technology | More Information | Training.gov Details | |
| MEM17003A | Assist in the provision of on the job training | More Information | Training.gov Details | |
| MSAENV272B | Participate in environmentally sustainable work practices | More Information | Training.gov Details | |
| Elective | ||||
| MEM07005C | Perform general machining | More Information | Training.gov Details | |
| MEM07006C | Perform lathe operations | More Information | Training.gov Details | |
| MEM07007C | Perform milling operations | More Information | Training.gov Details | |
| MEM07015B | Set computer controlled machines/processes | More Information | Training.gov Details | |
| MEM07016C | Set and edit computer controlled machines/processes | More Information | Training.gov Details | |
| MEM07018C | Write basic NC/CNC programs | More Information | Training.gov Details | |
| MEM07024B | Operate and monitor machine/process | More Information | Training.gov Details | |
| MEM07028B | Operate computer controlled machines/processes | More Information | Training.gov Details | |
| MEM09002B | Interpret technical drawing | More Information | Training.gov Details | |
| MEM12003B | Perform precision mechanical measurement | More Information | Training.gov Details | |
| MEM12006C | Mark off/out (general engineering) | More Information | Training.gov Details | |
| MEM18001C | Use hand tools | More Information | Training.gov Details | |
| MEM18002B | Use power tools/hand held operations | More Information | Training.gov Details | |
| MEM18003C | Use tools for precision work | More Information | Training.gov Details | |
| MEM18004B | Maintain and overhaul mechanical equipment | More Information | Training.gov Details | |
| MEM18005B | Perform fault diagnosis, installation & removal of bearings | More Information | Training.gov Details | |
| MEM18006C | Repair & fit engineering components | More Information | Training.gov Details | |
| MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies | More Information | Training.gov Details | |
| MEM18009B | Perform levelling and alignment of machines and engineering components | More Information | Training.gov Details | |
| MEM18018C | Maintain pneumatic system components | More Information | Training.gov Details | |
| MEM18020B | Maintain hydraulic system components | More Information | Training.gov Details | |
| MEM18055B | Dismantle, replace and assemble engineering components | More Information | Training.gov Details | |
| MEM05007C | Perform manual heating and thermal cutting | More Information | Training.gov Details | |
| MEM05012C | Perform routine manual metal arc welding | More Information | Training.gov Details | |
| MEM12001B | Use comparison and basic measuring devices | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| MEM12023A | Perform engineering measurements |
| MEM12024A | Perform computations |
| MEM13014A | Apply principles of occupational health and safety in the work environment |
| MEM14004A | Plan to undertake a routine task |
| MEM14005A | Plan a complete activity |
| MEM15002A | Apply quality systems |
| MEM15024A | Apply quality procedures |
| MEM16006A | Organise and communicate information |
| MEM16007A | Work with others in a manufacturing, engineering or related environment |
| MEM16008A | Interact with computing technology |
| MEM17003A | Assist in the provision of on the job training |
| MSAENV272B | Participate in environmentally sustainable work practices |
| MEM07005C | Perform general machining |
| MEM07006C | Perform lathe operations |
| MEM07007C | Perform milling operations |
| MEM07015B | Set computer controlled machines/processes |
| MEM07016C | Set and edit computer controlled machines/processes |
| MEM07018C | Write basic NC/CNC programs |
| MEM07024B | Operate and monitor machine/process |
| MEM07028B | Operate computer controlled machines/processes |
| MEM09002B | Interpret technical drawing |
| MEM12003B | Perform precision mechanical measurement |
| MEM12006C | Mark off/out (general engineering) |
| MEM18001C | Use hand tools |
| MEM18002B | Use power tools/hand held operations |
| MEM18003C | Use tools for precision work |
| MEM18004B | Maintain and overhaul mechanical equipment |
| MEM18005B | Perform fault diagnosis, installation & removal of bearings |
| MEM18006C | Repair & fit engineering components |
| MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies |
| MEM18009B | Perform levelling and alignment of machines and engineering components |
| MEM18018C | Maintain pneumatic system components |
| MEM18020B | Maintain hydraulic system components |
| MEM18055B | Dismantle, replace and assemble engineering components |
| MEM05007C | Perform manual heating and thermal cutting |
| MEM05012C | Perform routine manual metal arc welding |
| MEM12001B | Use comparison and basic measuring devices |
DIESEL FITTING/MECHANICAL - EMERALD
MEM18033B - Perform engine bottom end overhaul
5 day (38hr) delivery on campus with third party report completed on work site.
- On-campus
| Elective unit | ||||
|---|---|---|---|---|
| MEM18033B | Perform engine bottom-end overhaul | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| MEM18033B | Perform engine bottom-end overhaul |
Course Assessment Information
RPL - Students who have previous informal and formal learning need to advise their trainer/assessor prior to enrolment. If the student wishes to apply for an RPL they need to apply to the RPL Centre.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
| Assessment Types |
|---|
| Third Party Verification |
| Written/Electronic Assessment |
| Practical Task |
| RPL |
Course Learning Outcomes
Where and when can I start?
Please view the more details information for any additional information related to this course.
Domestic 2018 Availabilities
Diesel Fitting/Mechanical - Rockhampton
There are currently no intakes scheduled for this course structure.
Diesel Fitting/Mechanical - Mackay
There are currently no intakes scheduled for this course structure.
Fitting and Turning - Gladstone
On-campus
Gladstone City
December: Full Time
Fitting and Turning - Mackay
There are currently no intakes scheduled for this course structure.
Fitting and Turning - Rockhampton
There are currently no intakes scheduled for this course structure.
DIESEL FITTING/MECHANICAL - EMERALD
There are currently no intakes scheduled for this course structure.
Domestic 2019 Availabilities
Diesel Fitting/Mechanical - Rockhampton
There are currently no intakes scheduled for this course structure.
Diesel Fitting/Mechanical - Mackay
There are currently no intakes scheduled for this course structure.
Fitting and Turning - Gladstone
On-campus
Gladstone City
October: Part Time
Fitting and Turning - Mackay
There are currently no intakes scheduled for this course structure.
Fitting and Turning - Rockhampton
There are currently no intakes scheduled for this course structure.
DIESEL FITTING/MECHANICAL - EMERALD
There are currently no intakes scheduled for this course structure.
For individual class days and times for each intake please check the TAFE Timetable located here
The availabilities shown above are for the current and future years. To view any historic availabilities please press "Show Historic Availabilities" below:
Show Historic Availabilities
Show Historic Availabilities
More Details
More Details
Third Party Services arrangement
PT Thiess Contractors Indonesia provides the following services on behalf of CQUniversity for this course:
- Recruitment of learners through PT Thiess employees
- Provision of educational or support services
- Delivery of training and/or assessment
PT Thiess employees should make contact by Telephone: +62 21 2754 9999 or Email: miningjobs@thiess.com.au.