Previous Version Version Effective: 15th of November, 2022
Version Effective: 15th of November, 2022

MSF31113 - Certificate III in Cabinet Making

Course Details

Course Summary

This qualification is for indentured apprentices who are involved in the manufacture and installation of fitted furniture, typically in a kitchen, bathroom or related context. This qualification is delivered over four (4) years in five (5) stages. Each stage of training is unique and dedicated to providing the apprentice with a level of competence in line with the apprentice’s progress through their apprenticeship and industry expectation. Each stage is of varying duration based on the number of competencies being delivered and assessed. As the training and assessment are competency-based it may be possible for the apprentice to complete their training sooner if they demonstrate the required skill level during the stage being delivered.


Entry Requirements

This course is for apprenticeship training only. Students must be employed as apprentices in a relevant industry.

Completion of the bksb (Basic Key Skills Builder) online literacy and numeracy assessment prior to enrolment, unless the student has completed an equal or higher level course.

There are no other entry requirements.


Course Details

Course Type Qualification
Student Availability
  • Domestic
Fees For detailed information on Course Fees, visit www.cqu.edu.au/fees
Application Mode
  • Other
How to Apply Please Enquire
Study Area
  • Apprenticeships, Trades & Training
Skill Area
  • Building and Construction
AQF Level Level 3: Certificate III

Admission Codes

Domestic Students
Tertiary Admission Centre Codes (TAC) Codes
Not Applicable
International Students
CRICOS Codes
Not Applicable

Student Outcomes, Career Opportunities and Occupations

This qualification covers the skills and knowledge required to perform a range of skills at trade-level for those working in furniture making and those involved in the manufacture and installation of fitted furniture typically in a kitchen, bathroom and related context. Installation skills may be applied to new or renovation work.

Course Structures

In order to complete this course, you must:

  1. Complete 6 core units
  2. Complete 22 elective units

Study Mode Definitions

  • Online: Online courses provide the flexibility to study without normally requiring a student to visit a campus. Course content is studied through a number of means including the use of online discussion forums, electronic library resources, by contacting lecturers and teachers, and receiving study materials online/electronically. Work integrated learning, including placements, may be included in some courses.
  • On-campus: Students studying in on-campus mode typically are expected to attend and participate in regular, structured on-campus teaching and learning activities throughout the University’s academic term. These activities may include lectures, tutorials, workshops and practice, online or other activities and normally will be timetabled at a CQUniversity campus or approved delivery site.
  • Mixed Mode: Students studying in mixed mode will participate in a combination of online learning activities in addition to site-specific learning activities, which may include residential schools, co-op placements and/or work-integrated learning as a compulsory requirement of a unit. The additional site-specific learning activities are what differentiates a mixed-mode unit from an online unit.

*All study modes may include Vocational placement and/or work integrated learning.

Select a course structure below to view the delivery details, including the different study modes offered for each structure.

Please select a course structure from the options below:
Standard Course Structure (Apprentices Only)

This course is for apprentices only.  Apprenticeships are typically delivered within a 4 year period.

  • Employer Based (VET Providers Only)
  • On-campus
  • RPL/RCC/Credit
Apprentice Group Core
MSFFM2001 Use furniture making sector hand and power tools More Information Training.gov Details
MSFGN2001 Make measurements and calculations More Information Training.gov Details
MSMENV272 Participate in environmentally sustainable work practices More Information Training.gov Details
MSMSUP106 Work in a team More Information Training.gov Details
MSFGN3001 Read and interpret work documents More Information Training.gov Details
Apprentice electives

Remove TLID2003 and replace with update unit TLID0021 - these units are equivalent. 15/11/2022 edit of package

Remove MSFKB3001 and replace with unit MSFKB3011 - these units are equivalent.

MSFFM2002 Assemble furnishing components More Information Training.gov Details
MSFFM2003 Select and apply hardware More Information Training.gov Details
MSFFM2011 Apply manufactured board conversion techniques More Information Training.gov Details
MSFFM3019 Set up, operate and maintain automated edge banding machines More Information Training.gov Details
MSFKB2001 Prepare for cabinet installation More Information Training.gov Details
MSFFM3005 Fabricate custom furniture More Information Training.gov Details
MSFFM3010 Prepare cutting list from plans and job specifications More Information Training.gov Details
MSFGN3002 Estimate and cost job More Information Training.gov Details
MSFKB3002 Determine requirements for installation of cabinets More Information Training.gov Details
MSFKB3003 Check and measure fit of cabinets More Information Training.gov Details
MSFKB3004 Conduct on-site adjustments to cabinets and components More Information Training.gov Details
MSFKB3005 Fabricate cabinets for the built-in environment More Information Training.gov Details
MSFKB3006 Install fitted cabinets and components More Information Training.gov Details
MSFFF2006 Apply surface coatings by spray gun More Information Training.gov Details
MSFFM3003 Produce angled and curved furniture using manufactured board More Information Training.gov Details
MSFFM3011 Measure and draw site layout for manufactured furniture products More Information Training.gov Details
MSFFM3012 Set up, operate and maintain sawing machines More Information Training.gov Details
MSFFM3013 Set up, operate and maintain drilling machines More Information Training.gov Details
MSFFM3015 Set up, operate and maintain planing and finishing machines More Information Training.gov Details
TLID0021 Store and handle dangerous goods and hazardous substances More Information Training.gov Details
CPCWHS1001 Prepare to work safely in the construction industry More Information Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
Unit Code Unit Name
MSFFM2001 Use furniture making sector hand and power tools
MSFGN2001 Make measurements and calculations
MSMENV272 Participate in environmentally sustainable work practices
MSMSUP106 Work in a team
MSFGN3001 Read and interpret work documents
MSFFM2002 Assemble furnishing components
MSFFM2003 Select and apply hardware
MSFFM2011 Apply manufactured board conversion techniques
MSFFM3019 Set up, operate and maintain automated edge banding machines
MSFKB2001 Prepare for cabinet installation
MSFFM3005 Fabricate custom furniture
MSFFM3010 Prepare cutting list from plans and job specifications
MSFGN3002 Estimate and cost job
MSFKB3002 Determine requirements for installation of cabinets
MSFKB3003 Check and measure fit of cabinets
MSFKB3004 Conduct on-site adjustments to cabinets and components
MSFKB3005 Fabricate cabinets for the built-in environment
MSFKB3006 Install fitted cabinets and components
MSFFF2006 Apply surface coatings by spray gun
MSFFM3003 Produce angled and curved furniture using manufactured board
MSFFM3011 Measure and draw site layout for manufactured furniture products
MSFFM3012 Set up, operate and maintain sawing machines
MSFFM3013 Set up, operate and maintain drilling machines
MSFFM3015 Set up, operate and maintain planing and finishing machines
TLID0021 Store and handle dangerous goods and hazardous substances
CPCWHS1001 Prepare to work safely in the construction industry

Standard Course Structure (FFS Only)

This course is for Fee for Service (FFS) students (e.g. Skills test, apprentices wishing to do extra units under FFS).

  • RPL/RCC/Credit
  • On-campus
No units are associated with this course


Course Assessment Information

RPL - Students who have previous informal and formal learning need to advise their trainer/assessor prior to enrolment. If the student wishes to apply for an RPL they need to apply to the RPL Centre.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
Assessment Types
Written/Electronic Assessment
Practical Task
RPL
Course Learning Outcomes
Where and when can I start?
Please view the more details information for any additional information related to this course.

There are currently no intakes for this course.
More Details

More Details

Third Party Services arrangement

JM Kelly Management Pty Ltd provides the following services on behalf of CQUniversity for this course:

  • Recruitment of apprentices employed by JM Kelly Management
  • Provision of educational or support services
  • Delivery of training and/or assessment

Apprentices should email: project@jmk.com.au or speak to their local CQUni Vocational Industry Officer.