Previous Version Version Effective: 14th of February, 2024
Version Effective: 14th of February, 2024

MSL30122 - Certificate III in Laboratory Skills

Course Details

Course Summary

This qualification reflects the role of workers who perform a limited range of laboratory operations and is the entry-level qualification required for laboratory personnel across all industry sectors. Job roles include laboratory technicians, instrument operators and similar personnel.

Laboratory technicians perform straightforward laboratory work involving a predictable flow of parallel or similar tasks, usually within one scientific discipline. They follow set procedures and recipes using well- developed technical skills and basic scientific knowledge. Technicians generally work inside a laboratory but may also perform technical tasks in the field or within production plants. They may also perform laboratory maintenance and office tasks.

Laboratory technicians:

  • perform straightforward technical tasks to prepare and test samples using relevant procedures, Australian Standards and readily available advice. These tasks generally require close attention to detail and to the accuracy and precision of measurements. They may require the use of manual or semi-automated techniques
  • operate test equipment and instruments and make limited adjustments to their controls
  • process and record data and recognise trends and out of control conditions
  • solve predictable problems using clear information or known solutions. Where alternatives exist, they are limited and apparent
  • work under close and regular supervision, although they may have autonomy for specific tasks and responsibility for their own outputs
  • take decisions within defined limits of responsibility
  • work as part of a team.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.


Entry Requirements

Students are required to have completed the literacy and numeracy assessment pre-enrolment in the form of the Basic Key Skills Builder online literacy and numeracy assessment or to have completed an equal or higher level course.

There are no training package entry requirements for MSL30122 Certificate III in Laboratory Skills mainstream students. However, STN pathway students (year 12) are required to have successfully completed MSL20118 or MSL20122 at CQUniversity. Mainstream and STN pathway students (year 12) enrolling in this course must attend the compulsory residential schools on the dates specified.


Course Details

Course Type Qualification
Student Availability
  • Domestic
Fees
Full Fee $5,278.00 (2024)
$5,460.00 (2025)
Subsidised Full Fee $1,092.00 (2024)
$1,118.00 (2025)
Subsidised Concession Fee $572.00 (2024)
$585.00 (2025)
Fee for service per unit $406.00 (2024)
$420.00 (2025)
Subsidised full fee per unit $84.00 (2024)
$86.00 (2025)
RPL Fee for service per Unit $203.00 (2024)
$315.00 (2025)
For detailed information on Course Fees, visit www.cqu.edu.au/fees
Application Mode
  • Direct To University
How to Apply Please Enquire or Apply Now
Study Area
  • Science and Environment
Skill Area
  • Laboratory Technology
AQF Level Level 3: Certificate III

Admission Codes

Domestic Students
Tertiary Admission Centre Codes (TAC) Codes
Not Applicable
International Students
CRICOS Codes
Not Applicable

Student Outcomes, Career Opportunities and Occupations

This qualification reflects the role of workers who perform a limited range of laboratory operations and is the entry-level qualification required for laboratory personnel across all industry sectors. Job roles include laboratory technicians, instrument operators and similar personnel.

Course Structures

In order to complete this course, you must:

  1. Complete 5 core units
  2. Complete 8 elective units

Study Mode Definitions

  • Online: Online courses provide the flexibility to study without normally requiring a student to visit a campus. Course content is studied through a number of means including the use of online discussion forums, electronic library resources, by contacting lecturers and teachers, and receiving study materials online/electronically. Work integrated learning, including placements, may be included in some courses.
  • On-campus: Students studying in on-campus mode typically are expected to attend and participate in regular, structured on-campus teaching and learning activities throughout the University’s academic term. These activities may include lectures, tutorials, workshops and practice, online or other activities and normally will be timetabled at a CQUniversity campus or approved delivery site.
  • Mixed Mode: Students studying in mixed mode will participate in a combination of online learning activities in addition to site-specific learning activities, which may include residential schools, co-op placements and/or work-integrated learning as a compulsory requirement of a unit. The additional site-specific learning activities are what differentiates a mixed-mode unit from an online unit.

*All study modes may include Vocational placement and/or work integrated learning.

Select a course structure below to view the delivery details, including the different study modes offered for each structure.

Please select a course structure from the options below:
Standard Course

1 - 2 Years

  • Mixed Mode
Cluster 1

MSL913004 and MSL952003 must be run together as they have a clustered practical assessment.

MSL913004 Plan and conduct laboratory/field work More Information Training.gov Details
MSL943004 Participate in laboratory or field workplace safety More Information Training.gov Details
MSL952003 Collect routine site samples More Information Training.gov Details
Cluster 2
MSL973025 Perform basic tests More Information Training.gov Details
MSL933008 Perform calibration checks on equipment and assist with its maintenance More Information Training.gov Details
MSL904003 Perform standard calibrations More Information Training.gov Details
Cluster 3

MSL973027 and MSL973028 are clustered units and must be enrolled in together.

MSL973027 Perform techniques that prevent cross-contamination More Information Training.gov Details
MSL973028 Perform microscopic examination More Information Training.gov Details
MSL934010 Maintain and control stocks More Information Training.gov Details
Cluster 4
BSBCMM211 Apply communication skills More Information Training.gov Details
MSL933009 Contribute to the achievement of quality objectives More Information Training.gov Details
MSL922002 Record and present data More Information Training.gov Details
Cluster 5
MSL974032 Perform chemical tests and procedures More Information Training.gov Details

Unit Sequence

Below is the recommended study sequence for this course. Please enrol in your units as per the following order.
Units with the same sequence number should be enrolled into at the same time.
Sequence Unit
1 MSL913004 - Plan and conduct laboratory/field work
2 MSL943004 - Participate in laboratory or field workplace safety
3 MSL952003 - Collect routine site samples
4 MSL973025 - Perform basic tests
5 MSL933008 - Perform calibration checks on equipment and assist with its maintenance
6 MSL904003 - Perform standard calibrations
7 MSL973027 - Perform techniques that prevent cross-contamination
7 MSL973028 - Perform microscopic examination
8 MSL934010 - Maintain and control stocks
9 BSBCMM211 - Apply communication skills
10 MSL933009 - Contribute to the achievement of quality objectives
11 MSL922002 - Record and present data
12 MSL974032 - Perform chemical tests and procedures


Sugar Industry Course

1 - 2 Years

  • Mixed Mode
Cluster 1
MSL913004 Plan and conduct laboratory/field work More Information Training.gov Details
MSL943004 Participate in laboratory or field workplace safety More Information Training.gov Details
MSL952003 Collect routine site samples More Information Training.gov Details
Cluster 2
MSL973025 Perform basic tests More Information Training.gov Details
MSL912002 Work within a laboratory or field workplace More Information Training.gov Details
MSL933008 Perform calibration checks on equipment and assist with its maintenance More Information Training.gov Details
Cluster 3
MSL953005 Receive and prepare samples for testing More Information Training.gov Details
MSL952004 Handle and transport samples or equipment More Information Training.gov Details
MSL973026 Prepare working solutions More Information Training.gov Details
Cluster 4
BSBCMM211 Apply communication skills More Information Training.gov Details
MSL933009 Contribute to the achievement of quality objectives More Information Training.gov Details
MSL922002 Record and present data More Information Training.gov Details
Cluster 5
MSL974032 Perform chemical tests and procedures More Information Training.gov Details

Unit Sequence

Below is the recommended study sequence for this course. Please enrol in your units as per the following order.
Units with the same sequence number should be enrolled into at the same time.
Sequence Unit
1 MSL913004 - Plan and conduct laboratory/field work
2 MSL943004 - Participate in laboratory or field workplace safety
3 MSL952003 - Collect routine site samples
4 MSL973025 - Perform basic tests
5 MSL912002 - Work within a laboratory or field workplace
6 MSL933008 - Perform calibration checks on equipment and assist with its maintenance
7 MSL953005 - Receive and prepare samples for testing
8 MSL952004 - Handle and transport samples or equipment
9 MSL973026 - Prepare working solutions
10 BSBCMM211 - Apply communication skills
11 MSL933009 - Contribute to the achievement of quality objectives
12 MSL922002 - Record and present data
13 MSL974032 - Perform chemical tests and procedures


STN pathway (year 12 students) with compulsory residential school

8 Months

For students who have successfully completed MSL20118/MSL20122 Certificate II in Sampling and Measurement at CQUniversity.

  • Mixed Mode
Core

Remaining core units (as listed below) for the qualification are 'credited' due to previous completion of Certificate II qualification. 

*  MSL913004 Plan and conduct laboratory/field work

*  MSL922002 Record and present data

*  MSL933009 Contribute to the achievement of quality objectives

*  MSL943004 Participate in laboratory or field workplace safety

MSL933009 Contribute to the achievement of quality objectives More Information Training.gov Details
BSBCMM211 Apply communication skills More Information Training.gov Details
Elective

MSL973027 Perform techniques that prevent cross-contamination and MSL973028 Perform microscopic examination are clustered units and must be enrolled in together.

Remaining elective units (as listed below) for the qualification are 'credited' due to previous completion of Certificate II qualification. 

*  MSL952003 Collect routine site samples

*   MSL912002 Work within a laboratory or field workplace

*   MSL952004 Handle or transport samples or equipment

*  MSMENV272 Participate in environmentally sustainable work practices 

MSL973027 Perform techniques that prevent cross-contamination More Information Training.gov Details
MSL973028 Perform microscopic examination More Information Training.gov Details
MSL973025 Perform basic tests More Information Training.gov Details
MSL953005 Receive and prepare samples for testing More Information Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
Unit Code Unit Name
MSL933009 Contribute to the achievement of quality objectives
BSBCMM211 Apply communication skills
MSL973027 Perform techniques that prevent cross-contamination
MSL973028 Perform microscopic examination
MSL973025 Perform basic tests
MSL953005 Receive and prepare samples for testing

Course Assessment Information

RPL - Students who have previous informal and formal learning need to advise their trainer/assessor prior to enrolment. If the student wishes to apply for an RPL they need to apply to the RPL Centre.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
Assessment Types
Written/Electronic Assessment
Practical Task
Third Party Verification
RPL
Other
Course Learning Outcomes
Where and when can I start?
Please view the more details information for any additional information related to this course.

2024 Residential Schools/Workshops

Standard Course

This course includes compulsory site-specific attendance at residential schools and/or workshops. Select your preferred location for further details.
Mackay Ooralea
Mackay - Cohort 2 2023 Continuing Students only
Location Mackay Ooralea, Building 3/G.03-1
Start Date 09/04/2024
End Date 17/04/2024
Start Time 9:00 AM
End Time 5:00 PM
Compulsory Yes
Mackay - Cohort 1 February 2024 commencements only
Location Mackay Ooralea, Building 3/G.03-1
Start Date 29/10/2024
End Date 06/11/2024
Start Time 9:00 AM
End Time 5:00 PM
Compulsory Yes

Domestic 2024 Availabilities

Standard Course

Mixed Mode
Mixed Mode includes a combination of online learning activities and compulsory site-specific attendance at residential schools and/or workshops.
February: Full Time/Part Time
July: Full Time/Part Time
August: Full Time/Part Time

Sugar Industry Course

Mixed Mode
Mixed Mode includes a combination of online learning activities and compulsory site-specific attendance at residential schools and/or workshops.
February: Full Time/Part Time
July: Full Time/Part Time
August: Full Time/Part Time

STN pathway (year 12 students) with compulsory residential school

There are currently no intakes scheduled for this course structure.
For individual class days and times for each intake please check the TAFE Timetable located here
More Details

More Details

Compulsory Attendance - Residential Schools

Attending the practical Residential Schools at a simulated laboratory at CQUniversity Mackay Ooralea campus is MANDATORY for all students in the course. The practical week is designed for you to complete the practical components of all the units in the course.

Please check with your teacher prior to booking travel and accommodation to ensure you will be required for the full residential school duration. 

 

Mackay Ooralea Campus - Cohort 2 July 2023 continuing students only

Start date: 09/04/2024  End date: 17/04/2024

9am – 5pm

 

Mackay Ooralea Campus - Cohort 1 February 2024 commencements only

Start date: 29/10/2024  End date: 06/11/2024

9am – 5pm

 

Requirements for your attendance at the practical week:

  • You MUST enrol into all of the course units as outlined in the course planner, prior to attendance at the residential school.
  • You MUST read your unit's learning guide and assessment material prior to attending the residential school sessions. 
  • It is also advised that students bring a printed copy of the assessments with them to the residential school for reference. 

What do you need to bring with you?

  • Your PPE such as lab coat, safety glasses. You can purchase those items at CQU Bookshop online.
  • Permanent pen to write on glassware during your practical class.
  • You must wear fully enclosed shoes in the laboratory at all times.
  • Ensure you have access to the relevant learning materials (printed copies) e.g. Laboratory manual, practical assessments, observation check sheets) with you. See the Moodle unit site for further details.  

Contact Us

To apply, or to find out more about this course, contact the Student Advice Team on 13 27 86.

 

Is what I already know taken into account?

Yes.  Your history of study, skills and experience does matter.  Consideration is given to your prior life and work experience as well as formal and informal training.  This may be applied for through Recognition of Prior Learning (RPL). https://www.cqu.edu.au/courses/study-information/credit-transfer-and-rpl/rpl   Documentary evidence will be requested. 

 

What else might I find useful?

Financial assistance with fees may be available through concessions or via ‘Time to Pay’ payment plan. This and other information such as student support, study and library assistance can be found at www.cqu.edu.au/student-life