CQUni Handbook

Previous Version Version Effective: 1st of February, 2021

Version Effective: 1st of February, 2021

RII20115 - Certificate II in Resources and Infrastructure Work Preparation

Course Details

Course Summary

This qualification reflects the roles of individuals who perform mainly routine tasks and procedures, using limited practical skills and fundamental operational knowledge and taking some responsibility for the quality of the work outcomes. Participants will learn the basics of health and safety, risk management, communication, planning and preparing to undertake a task, hand and power tool operation, measurements and calculations.

Entry Requirements

There are no entry requirements. It is recommended that students have a sound knowledge of Year 10 Maths and English.

Course Details

Course Type	Qualification
Student Availability	Domestic
Fees	For detailed information on Course Fees, visit www.cqu.edu.au/fees
Application Mode	Direct To University
How to Apply	Please Enquire or Apply Now
Study Area	Mining and Energy Start TAFE Now Work and Study Preparation
Skill Area	Mining
AQF Level	Level 2: Certificate II

Admission Codes

Domestic Students Tertiary Admission Centre Codes (TAC) Codes	Not Applicable
International Students CRICOS Codes	Not Applicable

Student Outcomes, Career Opportunities and Occupations

This course is a pathway qualification and will prepare you to undertake a Certificate III level course from the resources and infrastructure industry.

Delivery Agreement

School Partnership: Moranbah State High School provides the following services on behalf of CQUniversity for this course:

• Recruitment of senior students enroled at Moranbah State High School

• Provision of educational or support services, senior students should email principal@moranbahshs.eq.edu.au

Other: BMA Blackwater Original paperwork forwarded to Contract Services. (see TAS document attached under Validation of Training and Assessment Materials)

Course Structures

In order to complete this course, you must:

Complete 3 core units
Complete 6 elective units

Study Mode Definitions

Online: Online courses provide the flexibility to study without normally requiring a student to visit a campus. Course content is studied through a number of means including the use of online discussion forums, electronic library resources, by contacting lecturers and teachers, and receiving study materials online/electronically. Work integrated learning, including placements, may be included in some courses.
On-campus: Students studying in on-campus mode typically are expected to attend and participate in regular, structured on-campus teaching and learning activities throughout the University’s academic term. These activities may include lectures, tutorials, workshops and practice, online or other activities and normally will be timetabled at a CQUniversity campus or approved delivery site.
Mixed Mode: Students studying in mixed mode will participate in a combination of online learning activities in addition to site-specific learning activities, which may include residential schools, co-op placements and/or work-integrated learning as a compulsory requirement of a unit. The additional site-specific learning activities are what differentiates a mixed-mode unit from an online unit.

*All study modes may include Vocational placement and/or work integrated learning.

Select a course structure below to view the delivery details, including the different study modes offered for each structure.

Please select a course structure from the options below:

Start TAFE Now (STN) - Bundaberg

Duration

12 months part-time

Study Modes

Online
RPL/RCC/Credit

Core Enrol into all units at once.
RIIRIS201D	Conduct local risk control	More Information	Training.gov Details
RIIENV201D	Identify and Assess Environmental and Heritage Concerns	More Information	Training.gov Details
RIIWHS201D	Work safely and follow OHS policies and procedures	More Information	Training.gov Details
Elective Enrol into all units at once.
RIISAM202D	Isolate and access plant	More Information	Training.gov Details
RIICCM203D	Read and interpret plans and specifications	More Information	Training.gov Details
RIISAM207D	Apply Operational Maintenance Skills	More Information	Training.gov Details
RIISAM203D	Use hand and power tools	More Information	Training.gov Details
RIISAM201D	Handle resources and infrastructure materials and safely dispose of non toxic materials	More Information	Training.gov Details
RIICOM201D	Communicate in the Workplace	More Information	Training.gov Details
RIICCM201D	Carry out measurements and calculations	More Information	Training.gov Details
RIIBEF201D	Plan and organise work	More Information	Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.

Unit Code	Unit Name
RIIRIS201D	Conduct local risk control
RIIENV201D	Identify and Assess Environmental and Heritage Concerns
RIIWHS201D	Work safely and follow OHS policies and procedures
RIISAM202D	Isolate and access plant
RIICCM203D	Read and interpret plans and specifications
RIISAM207D	Apply Operational Maintenance Skills
RIISAM203D	Use hand and power tools
RIISAM201D	Handle resources and infrastructure materials and safely dispose of non toxic materials
RIICOM201D	Communicate in the Workplace
RIICCM201D	Carry out measurements and calculations
RIIBEF201D	Plan and organise work

Start TAFE Now (STN) - Moranbah SHS

Duration

12 months part-time

Study Modes

Online
RPL/RCC/Credit

Core
RIIRIS201D	Conduct local risk control	More Information	Training.gov Details
RIIWHS201D	Work safely and follow WHS policies and procedures	More Information	Training.gov Details
RIIENV201D	Identify and Assess Environmental and Heritage Concerns	More Information	Training.gov Details
Elective
RIICCM201D	Carry out measurements and calculations	More Information	Training.gov Details
RIISAM201D	Handle resources and infrastructure materials and safely dispose of non toxic materials	More Information	Training.gov Details
RIIBEF201D	Plan and organise work	More Information	Training.gov Details
RIICOM201D	Communicate in the Workplace	More Information	Training.gov Details
RIISAM203D	Use hand and power tools	More Information	Training.gov Details
RIISAM207D	Apply Operational Maintenance Skills	More Information	Training.gov Details

Unit Sequence

Below is the recommended study sequence for this course. Please enrol in your units as per the following order.
Units with the same sequence number should be enrolled into at the same time.

Sequence	Unit
1	RIIRIS201D - Conduct local risk control
1	RIIWHS201D - Work safely and follow WHS policies and procedures
1	RIICCM201D - Carry out measurements and calculations
2	RIISAM201D - Handle resources and infrastructure materials and safely dispose of non toxic materials
2	RIIBEF201D - Plan and organise work
3	RIICOM201D - Communicate in the Workplace
4	RIISAM203D - Use hand and power tools
4	RIISAM207D - Apply Operational Maintenance Skills
5	RIIENV201D - Identify and Assess Environmental and Heritage Concerns

Start TAFE Now (STN) - Mackay

Duration

Approx. 8-12 months, 7.5 hours per week for approx 32 weeks.

Study Modes

Mixed Mode
On-campus

Core units Enroll into all units at once
RIIWHS201D	Work safely and follow OHS policies and procedures	More Information	Training.gov Details
RIIRIS201D	Conduct local risk control	More Information	Training.gov Details
RIIENV201D	Identify and Assess Environmental and Heritage Concerns	More Information	Training.gov Details
Electives Enroll into all units at once
RIISAM203D	Use hand and power tools	More Information	Training.gov Details
RIIBEF201D	Plan and organise work	More Information	Training.gov Details
RIICCM201D	Carry out measurements and calculations	More Information	Training.gov Details
RIISAM201D	Handle resources and infrastructure materials and safely dispose of non toxic materials	More Information	Training.gov Details
RIISAM203A	Use hand and power tools	More Information	Training.gov Details
RIISAM207D	Apply Operational Maintenance Skills	More Information	Training.gov Details
RIICOM201D	Communicate in the Workplace	More Information	Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.

Unit Code	Unit Name
RIIWHS201D	Work safely and follow OHS policies and procedures
RIIRIS201D	Conduct local risk control
RIIENV201D	Identify and Assess Environmental and Heritage Concerns
RIISAM203D	Use hand and power tools
RIIBEF201D	Plan and organise work
RIICCM201D	Carry out measurements and calculations
RIISAM201D	Handle resources and infrastructure materials and safely dispose of non toxic materials
RIISAM203A	Use hand and power tools
RIISAM207D	Apply Operational Maintenance Skills
RIICOM201D	Communicate in the Workplace

Start TAFE Now (STN) - Emerald

Duration

Approx. 8-12 months, 7.5 hours per week for approx 32 weeks.

Study Modes

Mixed Mode
On-campus

Core Units Enroll into all units at once
RIIWHS201D	Work safely and follow OHS policies and procedures	More Information	Training.gov Details
RIIRIS201D	Conduct local risk control	More Information	Training.gov Details
RIIENV201D	Identify and Assess Environmental and Heritage Concerns	More Information	Training.gov Details
Elective Units Enroll into all units at once
RIISAM207D	Apply Operational Maintenance Skills	More Information	Training.gov Details
RIIBEF201D	Plan and organise work	More Information	Training.gov Details
RIICCM201D	Carry out measurements and calculations	More Information	Training.gov Details
RIICOM201D	Communicate in the Workplace	More Information	Training.gov Details
RIISAM201D	Handle resources and infrastructure materials and safely dispose of non toxic materials	More Information	Training.gov Details
RIISAM203A	Use hand and power tools	More Information	Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.

Unit Code	Unit Name
RIIWHS201D	Work safely and follow OHS policies and procedures
RIIRIS201D	Conduct local risk control
RIIENV201D	Identify and Assess Environmental and Heritage Concerns
RIISAM207D	Apply Operational Maintenance Skills
RIIBEF201D	Plan and organise work
RIICCM201D	Carry out measurements and calculations
RIICOM201D	Communicate in the Workplace
RIISAM201D	Handle resources and infrastructure materials and safely dispose of non toxic materials
RIISAM203A	Use hand and power tools

Course Assessment Information

RPL - Students who have previous informal and formal learning need to advise their trainer/assessor prior to enrolment. If the student wishes to apply for an RPL they need to apply to the RPL Centre.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.

Assessment Types
Written/Electronic Assessment
Third Party Verification
Practical Task
RPL

Course Learning Outcomes

Course Learning Outcomes

Where and when can I start?

Please view the more details information for any additional information related to this course.