The Associate Degree of Building Surveying will enable you to assess building documentation for code and standards compliance and inspecting staged works for Class 1 and 10 buildings, not exceeding two stories in height and a total floor area of 500 square metres, as defined by the Building Code of Australia (BCA).
Assistant building surveyors interpret and enforce laws and regulations controlling residential buildings (Building Code of Australia [BCA] Class 1 and 10) and work for local government, state and federal authorities including licensing and code boards, and private certifiers.
Duration | 4 years part-time |
---|---|
Credit Points that Must be Earned | 96 |
Number of Units Required | CQUniversity uses the concept of credits to express the amount of study required for a particular course and individual units. The number of units varies between courses. Units in undergraduate courses normally consist of 6 points of credit or multiples thereof (e.g. 12, 18, 24). |
Expected Hours of Study | One point of credit is equivalent to an expectation of approximately two hours of student work per week in a term. |
Course Type | Undergraduate Award |
Qualification (post nominal) | ADBldgSurv |
AQF Level | Level 6: Associate Degree |
Course Fees |
Indicative Year - 2024
Indicative Year - 2023
Indicative Year - 2022
|
Domestic Students Tertiary Admission Centre Codes (TAC) Codes |
|
---|---|
International Students CRICOS Codes |
Not Applicable |
Rank Threshold | SR 66.00 | ATAR 66.00 |
English Language Proficiency Requirements
If you were not born in Australia, Canada, New Zealand, United Kingdom, Ireland, South Africa or the United States of America, you are required to meet the English Language Proficiency requirements set by the University. Applicants are required to provide evidence of completion of:
Completed within Australia, Canada, New Zealand, United Kingdom, South Africa, Ireland, or United States of America, which will meet the English proficiency.
If you do not satisfy any of the above, you will need to undertake an English language proficiency test and achieve the following scores:
English test results remain valid for no more than two years between the final examination date and the date of commencement of study, and must appear on a single result certificate.
Each student will be assessed individually.
Domestic students - Assumed Knowledge - English, General Mathematics or Mathematical Methods.
Interim Awards | Not applicable |
---|---|
Exit Awards | CL57 - Diploma of Building Studies |
Accreditation |
|
No Residential School for this course.
Not applicable |
Year | Number of Students |
---|---|
2024 | 18 |
2023 | 25 |
2022 | 30 |
2021 | 35 |
2020 | 30 |
Please note that in some instances there may be similarities between course, entry and inherent requirements.
If you experience difficulties meeting these requirements, reasonable adjustments may be made upon contacting accessibility@cqu.edu.au. Adjustment must not compromise the academic integrity of the degree or course chosen at CQUniversity or the legal requirements of field education.
Examples are:
Examples are:
Examples are:
Examples are:
Examples are:
Course Learning Outcomes | ||||||
---|---|---|---|---|---|---|
Australian Qualifications Framework Descriptors | 1 | 2 | 3 | 4 | 5 | 6 |
1. KNOWLEDGE Have broad theoretical and technical knowledge with some depth in the underlying principles and concepts in one or more disciplines | ||||||
2. SKILLS Have cognitive skills to identify, analyse and evaluate information and concepts from a range of sources | ||||||
3. SKILLS Have cognitive, technical and creative thinking skills to demonstrate a broad understanding of knowledge and ideas with some depth in a discipline | ||||||
4. SKILLS Have cognitive, communication and analytical skills to interpret and transmit responses to sometimes complex problems | ||||||
5. SKILLS Have communication skills to make a clear and coherent presentation of knowledge and ideas with some intellectual independence | ||||||
6. APPLICATION OF KNOWLEDGE & SKILLS Demonstrate initiative and judgement in planning, problem solving and decision making in paraprofessional practice | ||||||
7. APPLICATION OF KNOWLEDGE & SKILLS Be able to adapt knowledge and skills in a range of contexts and/or for further studies in one or more disciplines | ||||||
8. APPLICATION OF KNOWLEDGE & SKILLS Be able to adapt fundamental principles, concepts and techniques to known and unknown situations | ||||||
9. APPLICATION OF KNOWLEDGE & SKILLS Demonstrate responsibility and accountability for own learning and work and in collaboration with others within broad parameters | ||||||
APPLICATION OF KNOWLEDGE & SKILLS Engage in reflective self-evaluation of own cultural values and perspectives to proactively create an inclusive workplace that affirms and celebrates cultural diversity |
Number of units: 16 | Total credit points: 96 |
---|
Students study the course by online education. Progression is based on an assumed maximum loading of 12 units of credit, 2 units per term. Students should note prerequisite requirements and unit availability when formulating and nominating their study load for the year. Units are offered annually. It is suggested that units be studied as shown in the recommended course study schedule. The loading may be varied to balance work and family commitments. If assistance is required, contact the Course Advice Team. Students should actively seek employment in the building industry.
Prospective students should note that exemptions from units within the course may be given where their previous study at AQF Certificate IV level or higher and relevant industry licensing fully meets the learning outcomes of a unit. Students should not enrol into a unit where they are seeking an exemption.
Note: Refer to the More Details tab for the link to the recommended course study schedule.
Exit award
After completing level 1 within the course, students may exit with CL57- Diploma of Building Studies
Level 1- 7 Compulsory units.
Level 1- 1 Elective unit.
Available units | ||
---|---|---|
Students must complete the following compulsory units: | ||
BLAR11033 | Building Materials 1 | |
BLAR11039 | Building Law & Regulations | |
BLAR11043 | Building Systems and Services 1 | |
BLAR11045 | Built Environment 1 | |
BLAR11049 | Built Environment Communication and Skills | |
BLAR11050 | Residential Construction | |
BLAR11051 | Construction Legislation 1 |
Available units | ||
---|---|---|
Students must complete 1 from the following units: | ||
BLAR11056 | Introduction to Hand and Digital Drawing | |
PPMP11001 | Project Management Principles | |
PPMP11002 | Project Planning and Integration |
Level 2- 8 Compulsory units.
Available units | ||
---|---|---|
Students must complete the following compulsory units: | ||
BLAR12052 | Geotechnical Studies | |
BLAR12053 | Professional Practice | |
BLAR12054 | Structural Design Processes | |
BLAR12056 | Construction Legislation 2 | |
BLAR12057 | Commercial Construction | |
BLSV12020 | Building Infrastructure Audits | |
BLSV12023 | Fire Safety Design | |
BLSV12024 | Inspection Procedures |
Course Planners
Course planners are online for each major, full-time or part-time study option, and commencing term. Students are also encouraged to create a personalised planner if obtaining credit, advance standing or studying at an alternate pace. The Engineering Undergraduate Course Moodle includes instructions for obtaining your personalised course planner.
Mobility and Exchange
This course supports overseas study through a short-term mobility practicum as part of the elective ENEG13001 Humanitarian Engineering Project or a semester exchange experience at an approved overseas institution. The Engineering Undergraduate Course Moodle includes current mobility and exchange programs, application instructions and staff contacts for inquiries.
Cadetships
Flexible and online course delivery options provide support for working students. The CQUniversity Engineering Cadetship model allows students to enter the engineering workforce from their first year of study. Cadets can extend their learning by directly applying new knowledge to workplace scenarios and learning from working with engineers and associates. All cadets are paid, and many are also offered full sponsorship of course tuition fees. Cadetship opportunities are posted on the CQUniversity Engineering Cadetships Website.
Course Articulation
The undergraduate engineering courses include a common foundation year, allowing students to articulate between courses with minimal or no additional study should their circumstances or career aspirations change. Students may also change their major during their first year of study. The Engineering Undergraduate Course Moodle contains instructions and staff contacts for inquiries.
High School Course Pathways
Students can consider taking any of the several pathways designed to ease their transition into the course. Pathways for high school graduates commence in Year 11 and include reduced mathematics units to study by completing Mathematical Methods, early study of engineering units while at high school through CQUniversity’s Start Uni Now (SUN) program, and credit for other units by completing Engineering General and/or Design General with extra-curricular activities if supported at high school. Prospective students can request further information on engineering course pathways by emailing our college professional team SETAdmin@cqu.edu.au).
Mature-age Course Pathways
Mature-age students who do not meet the course entry requirements should contact our college professional team (SETAdmin@cqu.edu.au) to explore alternate pathways before committing to CQUniversity’s Skills for Tertiary Education Preparation Studies (STEPS) program.
Honours
Honours Class is determined by the grade point average (GPA) of the first attempts of the four capstone units, excluding ENEG14003 Engineering Honours Project Planning. Capstone units have the numerical code 14### and a weight of 12 credits. The Engineering Undergraduate Course Moodle lists capstone units for all majors. Students must also achieve an overall GPA of at least 5.00 to be eligible for Honours. Failure to meet this GPA will prohibit awarding First or Second Class Honours, regardless of performance in the capstone units. The Third-Class Honours level is not offered for this course.
Engineering Professional Practice
This course includes mandatory professional practice, as explained in the handbook.